Power steering pump spacer/with AC
#1
Power steering pump spacer/with AC
I am looking for some rough dimensions for the spacers that attach to the block front and side. These spacers align the pump. The one that slides over the mounting stud on the front of the motor is aproximately .750 long X 1.00 dia .
The one that that slides in between the lower block bracket and block is aproximately .500 dia. X 1.00 dia. Both have through holes. I have a 455 with AC so both hte alternator and P/S pump are on the drivers side. Of course I can not find the spacers which is par for the course somtimes. If somebody could measure theres and give me dimensions with a scale I can make my own.
Thanks
Tim
The one that that slides in between the lower block bracket and block is aproximately .500 dia. X 1.00 dia. Both have through holes. I have a 455 with AC so both hte alternator and P/S pump are on the drivers side. Of course I can not find the spacers which is par for the course somtimes. If somebody could measure theres and give me dimensions with a scale I can make my own.
Thanks
Tim
Thread
Thread Starter
Forum
Replies
Last Post
olds70supreme
General Discussion
6
January 23rd, 2014 10:22 AM