Stock Moog replacement springs
Registered User
Joined: Feb 2012
Posts: 542
From: Sault ste Marie ,Ont
If you want a little more lift , the Moog 5413 are what I just took off that are a 167 lb rate . Those springs would be 3/4''-1" higher than the 5401 I have on now .See the picture with these springs from before.
Thread Starter
Registered User
Joined: Aug 2013
Posts: 3,900
From: Central Illinois
Well I'll be darned
Looky what I found still attached to one of the rear springs.
[IMG]
[/IMG]
The # 9777794 seems to cross reference as the Moog 5401 you have reoldsman.
Soo....the 6321 seems to be the closest match with a one inch taller spring but with slightly lower values on the load (5401 = 727; 6321 = 689) and the spring rate (5401 = 129; 6321 = 119). Seems like the 6321 might squash a little more than reoldsman's 5413 but those have a slightly smaller I.D. from 5.580 to 5.530. Did that cause you any install problems reoldsman? And do you still have the springs and are willing to sell?
[IMG]
[/IMG]The # 9777794 seems to cross reference as the Moog 5401 you have reoldsman.
Soo....the 6321 seems to be the closest match with a one inch taller spring but with slightly lower values on the load (5401 = 727; 6321 = 689) and the spring rate (5401 = 129; 6321 = 119). Seems like the 6321 might squash a little more than reoldsman's 5413 but those have a slightly smaller I.D. from 5.580 to 5.530. Did that cause you any install problems reoldsman? And do you still have the springs and are willing to sell?
Last edited by Macadoo; Jul 25, 2015 at 05:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
