Snapped throttle cable
#1
Snapped throttle cable
Hey guys,
My Saturday morning drive turned into some roadside rigging. I noticed the throttle stuck once or twice and I had to tap the pedal to free it. After a few miles I was turning a corner and lost all throttle. The cable had snapped right at the barrel connector on the carb. I was able to jam a few strands of the cable back in and tighten it down to get home but it will need to be replaced. My question is what length cable do I need? I have an aftermarket carb so an original cable isn't needed. I was looking at this universal kit.
My Saturday morning drive turned into some roadside rigging. I noticed the throttle stuck once or twice and I had to tap the pedal to free it. After a few miles I was turning a corner and lost all throttle. The cable had snapped right at the barrel connector on the carb. I was able to jam a few strands of the cable back in and tighten it down to get home but it will need to be replaced. My question is what length cable do I need? I have an aftermarket carb so an original cable isn't needed. I was looking at this universal kit.
Thread
Thread Starter
Forum
Replies
Last Post
Oldssupreme
Small Blocks
11
July 29th, 2016 01:41 PM
RAMBOW
The Clubhouse
3
August 13th, 2012 05:29 PM