idle mixture
Just the facts...
Joined: May 2008
Posts: 1,259
From: THE GREAT WIDE-OPEN
in leans, out richens.
best set with a vacuum gage.
a good starting point for the mixture screws, if you need one, is 2 1/2 turns out from lightly seated. adjust them equally, 1/4 turn at a time, until you get to the "fine tuning".
bill
best set with a vacuum gage.
a good starting point for the mixture screws, if you need one, is 2 1/2 turns out from lightly seated. adjust them equally, 1/4 turn at a time, until you get to the "fine tuning".
bill
Thread
Thread Starter
Forum
Replies
Last Post
at3reg98
General Discussion
6
Apr 22, 2013 02:47 PM
73rocketship
Parts Wanted
2
Jul 6, 2012 06:45 AM
