When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi all, thanks for letting me join, this my new project. 1966 olds Jetstar 88, 2 door coupe. No rust except for surface rust and few holes in front floor pans. Everything there, all the trim and Even orginal glass,and not cracked. I post a few pics. But I wondering is there any other jetstar 88 owners here?? I know only made car for 3 years. Also it's both a A body, and B body, from research I done.
Quite the project you have there, the engine, rear, wheel bolt pattern, trans, (unless Turbo 400 optioned), brake parts are lesser on the Jstar than the other b bodies. Most everything else is the same. Good Luck with the project. You can just patch metal into the floors, otherwise as said in your other thread look at the Impala floor pan or see if full size Pontiac metal is available repro.
Quite the project you have there, the engine, rear, wheel bolt pattern, trans, (unless Turbo 400 optioned), brake parts are lesser on the Jstar than the other b bodies. Most everything else is the same. Good Luck with the project. You can just patch metal into the floors, otherwise as said in your other thread look at the Impala floor pan or see if full size Pontiac metal is available repro.
March 1st, 2018, 07:05 AM
