1970 first generation trunk lid
#1
1970 first generation trunk lid
What would the value be on a first generation trunk lid with factory wing both in exclleant condition ??? Fits 442 hardtop. Thanks. Greg
#6
It is the difference in the underside stamping for the regular two door Cutlass/442. Basically, I think there are three.
1) Early has a flat area under where the wing would bolt through. Although it appears that it does not have any association with the wing.
2) Had a 2" inch circle stamped in it but the circle was not cut out.
3)had a 2" inch circle stamped in it with the center of the circle cut out. And had crinkle marks at the bend of the brace that goes to the latch mechanism.
There was a post from 2012 that had pics but they didnt download for me.
I was at the body shop today and saw #2 and #3 side by side didn't take pics though😧
Last edited by Troys Toy 70; November 3rd, 2017 at 02:21 PM.
#9
That matches what we were looking at today. Top one represents the lid that came off of my 70 Cutlass a Jan 70 build I believe (will need to double check that) to replace the lid on my 70 442 a July 70 build and looks like the second one. The 442 lid had a lot of rust under the lip/seam.
Thread
Thread Starter
Forum
Replies
Last Post
2blu442
Parts For Sale
1
October 18th, 2014 04:55 PM
68RocketAction
Toronado
3
October 8th, 2014 10:03 PM
68RocketAction
Toronado
12
July 13th, 2014 10:32 PM
68RocketAction
Toronado
17
December 17th, 2013 02:15 PM