When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I need advise as to where I can find an electrical connector that will fit on this temperature sending gauge? I have called M&H and American Auto Wire and they dont sell individual connectors. Any advise or suggestions would be greatly appreciated. Thanks in advance.
74-87 ish chevy trucks they almost all have gauges and that style end on the sender and a green wire still ... My 86 1/2 ton 4x4 350 has that as well as my 83 gmc dually
located drivers side head by the exhaust ...
any wrecking yards nearby or craigslist ?
I may have one in my electrical box ... I chop nice ones off when I find em
74-87 ish chevy trucks they almost all have gauges and that style end on the sender and a green wire still ... My 86 1/2 ton 4x4 350 has that as well as my 83 gmc dually
located drivers side head by the exhaust ...
any wrecking yards nearby or craigslist ?
I may have one in my electrical box ... I chop nice ones off when I find em
Scott
Thanks Scott for your offer but I ended up making one.
That's exactly what I did with a friends Chevelle... I didn't know if you wanted to stay original or not.
I did not know what it looked like and after Joe sent that picture I got to thinking since I have 56 connectors I would just try my hand at making one. I am not all that in to being everything original. What I always want is something functions well and looks good. The fun of the hobby business.
I did not know what it looked like and after Joe sent that picture I got to thinking since I have 56 connectors I would just try my hand at making one. I am not all that in to being everything original. What I always want is something functions well and looks good. The fun of the hobby business.
And you may want to rethink the teflon tape on the sending units. Erroneous readings have been reported. The base is brass, it won't seize. Not in your lifetime anyway.
Saw several alternative methods illustrated. I work at a john deere equipment store. We carry that connector in stock, have to have them provide the clip to crimp the wire too.
Otherwise basic electrical pack from a hardware store with a simple female spade connector I saw in a pic above.