When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Here is one from the G body site. With that bore I installed 2.07/1.68 only little pocket port from bigger valves, good valve job. #7A Head Flow Intake exhaust .100 67 60 .200 141 113 .300 203 158 .400 237 186 .500 250 194 .600 253
Here is the actusl build specs
Mine is a simple build, about 10-12yrs ago. 374 Olds (4.125 bore x 3.500 stroke) 750 Holley RPM Intake - gasket ported 9.7:1 compression Diamond Pistons Total Seal Rings CP Wrist Pins GRP Rods 4340 Fact Forged 330 Crankshaft Strange Magic Cam HYD HS Roller Rockers #7 Heads ARP Main studs & straps Moroso pan Hooker Super Comp Headers 32* total timing
Vortecpro, what is the compression ratio and cam duration on the 327? Anywhere close to 9 to 1 and 222/228? I will put money on Cutlassefi running perfectly fine on 87 and could get by just fine with a 2500 stall converter.
It’s at least 10x harder to answer stupid questions or respond to dumb comments.
That’s what trolls feed on.
Please, just respond with…”Wow, I never knew that!” And move on, OR better yet, ignore them.
We all need to learn this. Even talking about his small genitally is a bad idea.
He’ll shrivel and die without attention. Promise.
-peter
Last edited by Rallye469; Sep 26, 2021 at 03:23 AM.
Reason: I failed to convey my distaste for the person in my first post.
I got an email notification from Summit Racing stating the pending ship date of the new heads is now March 04, 2022.
A few weeks ago it was January 28, 2022, then it got pushed to February 22, 2022, and now it's March 04, 2022.
Don't kill the messenger, I am just relaying what Summit told me. I hope it's sooner but for some reason Summit Racing keeps pushing the date further and further.
All the parts and everything else. Are sitting on cargo ships at every port. Same with workstation laptop I wanted. Date being pushed back all the time. Told it on a cargo ship sitting in LA. Companies ordering extra everything did not help.
I got an email notification from Summit Racing stating the pending ship date of the new heads is now March 04, 2022.
A few weeks ago it was January 28, 2022, then it got pushed to February 22, 2022, and now it's March 04, 2022.
Don't kill the messenger, I am just relaying what Summit told me. I hope it's sooner but for some reason Summit Racing keeps pushing the date further and further.
march fourth...the only date thats a command think about it !
All the parts and everything else. Are sitting on cargo ships at every port. Same with workstation laptop I wanted. Date being pushed back all the time. Told it on a cargo ship sitting in LA. Companies ordering extra everything did not help.
RIGHT.
oem's are 4 million units less built this year, but edel can't seem to find a supplier for guides and valves/springs and such. While those parts makers are sitting idle with their hands up their butts waiting on orders to fill.
Something is rotten in denmark. as they say.
I got an email notification from Summit Racing stating the pending ship date of the new heads is now March 04, 2022.
A few weeks ago it was January 28, 2022, then it got pushed to February 22, 2022, and now it's March 04, 2022.
Don't kill the messenger, I am just relaying what Summit told me. I hope it's sooner but for some reason Summit Racing keeps pushing the date further and further.
I just looked at summit and the BB roller head has a ship date of Feb 4th, and BB flat tap Mar 07. No eta on small block heads.
Did you get all the small block Victors too? cant find them at all.
I wonder what they were thinking when they stopped making that beautiful intake when they were planning a new serious small block head? someone has their head up their *** over there
Did you get all the small block Victors too? cant find them at all.
I wonder what they were thinking when they stopped making that beautiful intake when they were planning a new serious small block head? someone has their head up their *** over there
No I didn't, but I do have a nice stack of RPM and RPM air gaps!
He’s done that before. Why you guys believe anything he says is beyond me.
What I said was they were in danger of being discontinued. But ultimately they only discontinued the 4500 flange BB Victor, and they did that a couple of years ago. All others are still in the plan moving forward at this point.
Last edited by cutlassefi; Oct 4, 2021 at 05:14 AM.
He’s done that before. Why you guys believe anything he says is beyond me.
What I said was they were in danger of being discontinued. But ultimately they only discontinued the 4500 flange BB Victor, and they did that a couple of years ago. All others are still in the plan moving forward at this point.
Then why can’t I find a sb?
And why can’t a customer of mine get a big block rpm? Waiting 5 months
Local speed shops here cant order the sb Victor either… says unavailable
he’s done that before. Why you guys believe anything he says is beyond me.
What i said was they were in danger of being discontinued. But ultimately they only discontinued the 4500 flange bb victor, and they did that a couple of years ago. All others are still in the plan moving forward at this point.
Edelbrock has not moved production to China. Please don't post this, even as a joke, as some people will read it as gospel and repeat it. They are doing all that they can to ramp up production due to the move from CA to MS. Not being able to get some parts is not helping either. I know that the wait suck right now but it will get better.
Edelbrock has not moved production to China. Please don't post this, even as a joke, as some people will read it as gospel and repeat it. They are doing all that they can to ramp up production due to the move from CA to MS. Not being able to get some parts is not helping either. I know that the wait suck right now but it will get better.
^^^^^^ x2. Couldn’t have said it better myself.
Last edited by cutlassefi; Oct 5, 2021 at 03:19 PM.
