I have a stock Olds 350 in a 83 four door cutlass. Im looking for a good stall converter around 2800, 3.23-3.73 gears an aftermarket intake and a small cam for stock. Im also looking for a cheep alimunim radiator and an electric fan 16 inch. Thanks Im hoping to finish a cheep sleeper

 

I have some good used Mondello cams

 

What year is the 350; depending on compression ratio, etc. you may not want a "big" cam. Same goes for the intake. A gear will definitely help no matter which engine you have. Maybe a set of headers, too. Just speaking from years of doing this.

 

Its from 1972 any suggestions would be great! and any small cams ferndal

 

Also if its mostly stock you don't need a 2800 stall either. The cam requirements set the stall.

 

I wouldn't go any higher than a 1500 converter,for a stock 350,even a mild one with a cam.

 

I have some small hydraulic cams----I had them advertised on here awhile back but I'll check them and let you know.