carb linkage

Reply Subscribe

Thread Tools

Search this Thread

Oct 12, 2018 | 04:06 PM

aqua67w30

Thread Starter

Registered User

Joined: Jan 2015

Posts: 140

From: Oh

carb linkage

I'm looking for the linkage rod that connects the carb to the linkage on the firewall for a 67 442 4 speed.

Oct 12, 2018 | 04:09 PM

66-3X2 442

Registered User

Joined: Jul 2009

Posts: 5,189

From: Birmingham,Alabama

Quote:

Originally Posted by aqua67w30

I'm looking for the linkage rod that connects the carb to the linkage on the firewall for a 67 442 4 speed.

I probably have one if you or some body can give us the correct length. I have several but they are not marked. It's free.

Oct 14, 2018 | 11:14 AM

RAG

Registered User

Joined: Nov 2012

Posts: 814

From: Near Albuquerque, NM

Linkage rods are easily cut and shortened or lengthened as needed with weld or soldier, I've done it many times.

Oct 23, 2018 | 01:01 PM

aqua67w30

Thread Starter

Registered User

Joined: Jan 2015

Posts: 140

From: Oh

My motor isn't in the car yet but I'll try an estimated length.

Oct 23, 2018 | 02:28 PM

nicks1966

Registered User

Joined: Dec 2012

Posts: 547

From: elkhart indiana

Parts catalog doen't list one specific for a 4 speed, just one for all 67 f85 with 4 bc carb.
attached is a photo of the one I have adjusted all the way down is 11 5/8, fully extended is 13 1/4

Oct 24, 2018 | 11:01 AM

lemoldsnut

Registered User

Joined: Nov 2008

Posts: 3,345

From: Redmond, Oregon

I can do these also,
Email direct
lemoldsnut@aol.com
Larry

Oct 24, 2018 | 03:05 PM

aqua67w30

Thread Starter

Registered User

Joined: Jan 2015

Posts: 140

From: Oh

nicks1966, my rough guesstimate agrees with your measurements. 66-3x2 442 if you have one at this length let me know and I will pm you with my address and arrange payment for shipping.

Oct 24, 2018 | 07:45 PM

66-3X2 442

Registered User

Joined: Jul 2009

Posts: 5,189

From: Birmingham,Alabama

Quote:

Originally Posted by aqua67w30

nicks1966, my rough guesstimate agrees with your measurements. 66-3x2 442 if you have one at this length let me know and I will pm you with my address and arrange payment for shipping.

OK,I'll check tomorrow.

Mike

Oct 25, 2018 | 09:00 AM

66-3X2 442

Registered User

Joined: Jul 2009

Posts: 5,189

From: Birmingham,Alabama

Quote:

Originally Posted by aqua67w30

nicks1966, my rough guesstimate agrees with your measurements. 66-3x2 442 if you have one at this length let me know and I will pm you with my address and arrange payment for shipping.

Yes I have one. Send me your mailing address and I'll send it out. My email is pchopesq@aol.com

Thanks

Mike