I am still looking for the hub cap key socket for my 1984 olds custom cruiser. It has the letter a stamped on the end of it. I have the original but would like a spare. Thanks.

Phil scott

 

You might get one at the dealer, but you would be more successful going to the auto mall (wreckers)...

 

I am looking for the hub cap key socket with the letter a on the end of it and also does anyone have the center pieces that snap into the hub cap to cover the bolt hole? I could use two of those also. Thanks. Phil scott

 

Without seeing a pic, hard to say definitively, but I do not think the hub cap key socket is unique to Olds. I say this as the description sure sounds like a similar device I had on my 1984 Buick Riviera to remove the wire wheel hub caps?

 

Yes, this is what he seeks. I am sure there were a set number of different 'codes' made and used amongst a variety of GM cars.

 

For an '84, you want a centre piece with a silver background and red rocket.

 

yes thank you, i have all four originals, i am looking for a few spares. Phil Scott

 

Like the rest of us, you will have to buy some more parts cars!!

 

Well i hardly think i need an entire "parts" car for a hub cap socket and the middle emblem.

 

I have the hub cap wrench coded A. Also the rectangular covers but they have a red background with a silver rocket. I do have all 4
Tim

 

Tim, mine also have the red background. How much do you want for them and the wrench shipped? I have all the original ones but would like to have some spares just in case. Thanks. Phil scott

 

$35. For everything shipped ?

 

That's fine. How do i pay you. Do you take pay pal? Phil scott

 

I do have pay pal, but I have no idea how to handle a transaction on CO, ebay is automatic.

 

Tim you just give him your paypal email name and he will log onto paypal and send a payment directly to your account and if he declares it as gift money instead of service there is no paypal fee....you can do that with someone trustworthy

 

That's easy enough, Thankyou
Tim

 

I am still trying to find the hub cap center emblems and the locking socket for same for a 1984 Olds Custom Cruiser wagon. The emblems on the back side have a dome in the center with a grove around it for the locking springs and at the bottom of one end a pin that centers them in the cap. The socket key MUST HAVE THE LETTER A STAMPED on the end of it. Thanks for any help anyone can give me. Phil Scott -

 

Phil, does any off this break down look correct?
http://parts.nalleygmc.com/showAssem...rimLevel=15255

Pat

 

Pat. It looks correct from what I can see of it but the individual pieces are not big enough or detailed enough to tell. Phil Scott.I could take pics of the emblem and the socket key but I dont know how to download pics on here.

 

Can you e-mail your pics to me? 1970cs45@gmail.com

Pat

 

Yes, I will take pics of them today and send to your e mail address. The socket tgool of course I won;t be able to send a pic of the interior splines but I can count them and like i said, GM used letters on the ends of the tools for different cars and mine has a large capital A on the end of it. Phil Scott

 

I am looking for the following hub cap center emblem and the locking socket key for my 84 olds custom cruiser. I hope I have figured out how to download pictures to my thread. Phil Scott The locking socket has 7 splines inside the barrel.
Olds hub emb lem and soscket key 001.jpg
Olds hub emb lem and soscket key 002.jpg
Olds hub emb lem and soscket key 003.jpg
Olds hub emb lem and soscket key 004.jpg
Olds hub emb lem and soscket key 005.jpg

 

I found the hub cap emblems I needed from another member here but am still trying to find that socket locking tool. It must have the letter A stamped on the end of it I am told by other guys here to fit this particular hubcap.I realize that it is going to be almost impossible to find due to it's size and the age of the car, most of them having been scrapped by now. I am surprised mine survived. Well I can hope I guess. Thanks for all the responses I have had here.

Olds hub emb lem and soscket key 004.jpg

Olds hub emb lem and soscket key 005.jpg

 

I am still looking for the wire hub cap tool with the letter a stamped on the end of it. It has 7 internal splines. Thanks.

Phil

 

Hoping to find a hub cap locking tool for my car. The tool has 7 internal splines and has the letter a stamped on a red background on the end of the tool. Thanks for any help anyone can give me to find one of these.

Phil scott

Olds hub emb lem and soscket key 004.jpg

 

Go to ebay and type in: Red A Key lock Wrench Oldsmobile. See if that is the tool your looking for.

 

Another thing you could try is to get a complete set of bolts with matching tool with a different letter.