Looking for no# 5 heads 350 cu

 

I have a set of #4 heads they were shaved to 54cc to make just under 9 to 1 compression on cast replacement pistons. I had a valve job done, intake passages were filled exhaust ports were welded at a local Napa I worked for, then I ground out the exhaust port air bumps, polished the chambers and added roller tip rockers, guide plates and 3/8 push rods with 5/16 tips. They have about 7-8 k on them asking $650 plus the ride from upstate NY. I went with Pro comps now. I can get the cc and pics if your interested.

 

I have a 68 350 that we had running just a couple of weeks ago and it has #5 heads on it. Ran good

email me direct

Larry Moyer
Redmond, Oregon
541-815-4363
lemoldsnut@aol.com

 

It might help to post your location. I have several sets down here in South Florida. I'm currently in the process of getting a couple of sets ready for installation for members; however, I will sell remaining ones as cores if needed. Thanks, Bob.