66-3X2 442

I figure the best place to look for some 66 A.I.R parts would be in the pollution free state of CA. I have a guy needing the 4 groove pulleys,the pump and the complete system or any parts from it. It's needed for a 66 442 but I think 330-400-425 parts are the same. Let me know what you have.

Thanks

Mike

2blu442

Hello Mike
I've got at least one complete setup and parts from 2 or 3 more. It will be the weekend before I can get to them, but if your still needing the parts I'll send you pictures of what I have. John

66-3X2 442

Hi John

That's great,let me know what you have.

Thanks

Mike

2blu442

Mike, here's parts from a 1966 330. I would also pull the three vacuum fittings off the intake. I only have one set of the four belt pullies. They've been powder coated and the water pump one has the outer pully bent out in one spot. Check out the photos and let me know what you think. It looks like the Toro used different parts, such as the tubes that attach to the heads. I've got several photos of various parts, 1966-67, Cutlass, Olds 98, and Toronado on my photobucket site of: http://s90.photobucket.com/albums/k2...g%20Componets/

P1010072.jpg

P1010073.jpg

P1010108.jpg

P1010107.jpg

P1010104.jpg

P1010103.jpg

P1010099.jpg