Looking for a NOS Cam part number 402569 it’s the w30 manual trans cam, lifters too. Thank you

 

I believe several cam grinders can furnish a duplicate cam, if you can't find one. The lifters are regular GM Oldsmobile type. Cutlassefi may be able to help. Good luck.

 

402569 is the 328/328 deg cam used in all 1968-69 W30 motors and in 1970 W30 manual trans motors. Be careful with aftermarket duplicates. Some of those are "cheater" cams for NHRA stock class cars. They meet the published factory lift and duration but may have more aggressive ramps on the lobes. This provides more power at the expense of valvetrain life.

 

That area under the curve will get you.

 

Check the "Parts for Sale" section. It seems like someone had an NOS or near new factory camshaft for sale.

 

I have one, ran for a short time. Too much cam for an otherwise stock, low compression engine. I'll have to check the part number to verify. Still in the cardboard tube. Will be priced after I verify part number.

 

I have one that’s very used, if I can’t find a NOS one a guy sent me link to Oregon Cam Grinding. NOS is preferred because everyone tells me the material is so much better.