Looking for a 1970 350 Intake Manifold #404520 dated anywhere from 270 to 330 on the numbers cast in front of the carb mount. Thanks!

 

That's a #10 casting for easier spotting.

 

Now looking for any #404520 manifold, regardless of date! Thanks!

 

Where are you located? Shipping is high on these intakes if it has to go very far. I have a complete 70 4bbl engine but don't want to separate the intake or ship the engine. I am in Brazil Indiana if you are close and interested. The intake on this engine is 352 date

 

Thanks, located in PA. Just hunting for a manifold at the moment (and a 4bbl air cleaner).

 

I have a 70 4 bbl air cleaner. I would need $100 and shipping. You may be able to find one for less if you have time to shop around.

 

Depending on where you are in PA, driving to Indiana to Eric's might not be such a bad idea. Shipping on a bare cast iron intake is gonna be at least as much as the intake. Shipping on a breather will be about $30.00. Been there and done both. Correctly dated (of even close) Oldsmobile stuff isn't falling off the cherry tree. I'm guessing by your low number of posts that you might be new to searching for vintage Oldsmobile items. If you are new, congrats and welcome aboard. You'll find the group here is courteous, knowledgable and eager to help.

 

Thank you for all the responses and advice. I'm new to Oldsmobiles, but not new to old cars and parts. Luckily, I was able to locate an air cleaner assembly and manifold. The manifold is the right casting so its close enough, but id still be interested in a correctly dated one if anyone happens across one. Thanks again!

 

I know this is an old thread from 16', any chance you still got your 70 4bbl engine around still? I'd be interested if so, im here in eastern iowa. Thanks.

S.R

 

Not only is this an old thread, but the OP hasn't shown any activity since Feb of 2021. Since he had only 6 visits ever, not likely he will see your post.

 

He's probably responding to post #4 above.

 

I do not have it any more. Sorry