Trim and doors
#2
I will take maybe the best 2 68 442/Cutlass S lower trunk trims you have. I'm looking for good chrome and all posts intact.
Prices, please. We will go from there. I might buy all of them?
Prices, please. We will go from there. I might buy all of them?
#3
Just $100 each on trim
Ill take pics of the back so you can you see all posts intact. *top one has two missing
Last edited by Bee Saint Louis; April 4th, 2022 at 07:10 PM.
#4
Looks like at least 2 have intact posts? Hows is the chrome? If good I'll take at least two off your hands.
Might take all the 68 442 & Cutlass trunk trim pieces if chrome is good?
Ill PM you to exchange phone numbers,and make sure we're both on the same channel, and figure out the shipping particulars.
The 442 & Cutlass S trunk trim is:
~62.50" long x 1.059" wide.
PN: 7795235
The Vert trunk trim is:
60 1/4" long assume same 1.059" wide
PN: 7795236
This is the piece Im looking for:
Might take all the 68 442 & Cutlass trunk trim pieces if chrome is good?
Ill PM you to exchange phone numbers,and make sure we're both on the same channel, and figure out the shipping particulars.
The 442 & Cutlass S trunk trim is:
~62.50" long x 1.059" wide.
PN: 7795235
The Vert trunk trim is:
60 1/4" long assume same 1.059" wide
PN: 7795236
This is the piece Im looking for:
#5
Hi Bee,
I PM'ed you with my contact info.
Here is the preferred shipping method. Small-sized bubble wrap. Wrapped tightly the entire length. Actually, this is the only way to ship these pieces to mitigate shipping damage.
I pay for the shipping & the material. I have pay pal Friends n Family. I guarantee if you go through the trouble to properly package & ship I do not back out of an agreement. I'm not a tire kicker.
This is an example of a single shipper. Obviously, with a larger diameter tube, you can fit more pieces. But PVC above 3" isn't recommended for the cost of the material and shipping.
The end caps should fit tightly and hold nicely with packing tape and or small wood screws.
TX
Steve
I PM'ed you with my contact info.
Here is the preferred shipping method. Small-sized bubble wrap. Wrapped tightly the entire length. Actually, this is the only way to ship these pieces to mitigate shipping damage.
I pay for the shipping & the material. I have pay pal Friends n Family. I guarantee if you go through the trouble to properly package & ship I do not back out of an agreement. I'm not a tire kicker.
This is an example of a single shipper. Obviously, with a larger diameter tube, you can fit more pieces. But PVC above 3" isn't recommended for the cost of the material and shipping.
The end caps should fit tightly and hold nicely with packing tape and or small wood screws.
TX
Steve
#6
No problem shipping them to you the way you like.
These are as is though. I can ship the way you suggest at your cost. I received these as they are and I’ve taken pictures. They are $100 each. I also see that they are curved and will need to be corrected if that’s possible to fit if they are to be straight. If you have someone local (maybe from the group) in Dallas,TX that can come look at them for you that may be a great idea also.
#7
If you can lay out the 3 I'm interested in and snap a couple of good pictures of the chrome and the mount posts. My main concerns are chrome pitting and missing posts.
The pieces I need measure 62.50" long x 1.059" wide.
They should have a natural curve to follow the curve of the trunk.
TX
Steve
The pieces I need measure 62.50" long x 1.059" wide.
They should have a natural curve to follow the curve of the trunk.
TX
Steve
#8
Do you have other 68-69 exterior stainless steel body trim?
Im looking for the stainless trim on the interior of a 68 Coupe which runs along the headliner above the side windows, Needs to be NOS or mint.
How many 68-69 doors do you have? Condition of doors? Rust?
Lets do business on the trunk trim. Please see the recent PM just sent.
TX Steve
Im looking for the stainless trim on the interior of a 68 Coupe which runs along the headliner above the side windows, Needs to be NOS or mint.
How many 68-69 doors do you have? Condition of doors? Rust?
Lets do business on the trunk trim. Please see the recent PM just sent.
TX Steve
#10
70 driver door with mirror $350 in Dallas for me to get to Fastenal to ship. approx $250 to ship.
Last edited by Bee Saint Louis; April 12th, 2022 at 10:07 AM.
#13
Bee Saint Louis. I just wanted to comment on you and your reasonable prices. Thank You for not trying to milk every dime and allowing normal buyers a chance. 👍
Zero jab at anyone here by the way.
Zero jab at anyone here by the way.
Last edited by no1oldsfan; April 12th, 2022 at 04:10 PM.
#14
Do you have other 68-69 exterior stainless steel body trim?
Im looking for the stainless trim on the interior of a 68 Coupe which runs along the headliner above the side windows, Needs to be NOS or mint.
How many 68-69 doors do you have? Condition of doors? Rust?
Lets do business on the trunk trim. Please see the recent PM just sent.
TX Steve
Im looking for the stainless trim on the interior of a 68 Coupe which runs along the headliner above the side windows, Needs to be NOS or mint.
How many 68-69 doors do you have? Condition of doors? Rust?
Lets do business on the trunk trim. Please see the recent PM just sent.
TX Steve
at least 4 doors. 3 post doors 1 that’s not. Trim has flaws.
#15
Hello Bell Saint Louis.
Did you get the PMs I sent?
Let's talk about the specific trunk trim pieces I'm interested in. I think I see 3 or 4 of them. Please call me to discuss.
Looks like you have other Olds parts?
We have a decent classified section here where you can list all of the parts you have to sell.
Rules to post are:
1. Snap good pictures (include the common rust areas like the lower door seams),
2. Clear descriptions of parts, e.g. dented, rusted, mint, driver quality etc...
3. Your shipping location,
4. Most importantly asking prices,
You will move a lot of inventory here.
Did you get the PMs I sent?
Let's talk about the specific trunk trim pieces I'm interested in. I think I see 3 or 4 of them. Please call me to discuss.
Looks like you have other Olds parts?
We have a decent classified section here where you can list all of the parts you have to sell.
Rules to post are:
1. Snap good pictures (include the common rust areas like the lower door seams),
2. Clear descriptions of parts, e.g. dented, rusted, mint, driver quality etc...
3. Your shipping location,
4. Most importantly asking prices,
You will move a lot of inventory here.
#16
Trim isnt in good condition. Doesnt meet your standards.
The trim isnt the best quality trim. Broken back studs, warped, etc. i would rather pass on the sale if it’s not local. If you have a local Dallas,TX member you know that can come check them out it would be best. Im ok with not selling them at this point.
Thread
Thread Starter
Forum
Replies
Last Post