Delete

 

I will take maybe the best 2 68 442/Cutlass S lower trunk trims you have. I'm looking for good chrome and all posts intact.
Prices, please. We will go from there. I might buy all of them?

 

Looks like at least 2 have intact posts? Hows is the chrome? If good I'll take at least two off your hands.
Might take all the 68 442 & Cutlass trunk trim pieces if chrome is good?
Ill PM you to exchange phone numbers,and make sure we're both on the same channel, and figure out the shipping particulars.

The 442 & Cutlass S trunk trim is:
~62.50" long x 1.059" wide.
PN: 7795235

The Vert trunk trim is:
60 1/4" long assume same 1.059" wide
PN: 7795236

This is the piece Im looking for:

 

Hi Bee,
I PM'ed you with my contact info.
Here is the preferred shipping method. Small-sized bubble wrap. Wrapped tightly the entire length. Actually, this is the only way to ship these pieces to mitigate shipping damage.
I pay for the shipping & the material. I have pay pal Friends n Family. I guarantee if you go through the trouble to properly package & ship I do not back out of an agreement. I'm not a tire kicker.
This is an example of a single shipper. Obviously, with a larger diameter tube, you can fit more pieces. But PVC above 3" isn't recommended for the cost of the material and shipping.
The end caps should fit tightly and hold nicely with packing tape and or small wood screws.
TX
Steve

 

If you can lay out the 3 I'm interested in and snap a couple of good pictures of the chrome and the mount posts. My main concerns are chrome pitting and missing posts.
The pieces I need measure 62.50" long x 1.059" wide.
They should have a natural curve to follow the curve of the trunk.
TX
Steve

 

Do you have other 68-69 exterior stainless steel body trim?
Im looking for the stainless trim on the interior of a 68 Coupe which runs along the headliner above the side windows, Needs to be NOS or mint.
How many 68-69 doors do you have? Condition of doors? Rust?
Lets do business on the trunk trim. Please see the recent PM just sent.
TX Steve

 

I'm interested in getting a driver and passenger door for 70 Cutlass. What do you have? Prices? PM me please.

Thanks,

Ben

 

Thanks! very interested. What does the inside side look like? Rust out of the inside frame is what I've got on the ones I have. Do you have a passenger door?

Ben

 

Bee Saint Louis. I just wanted to comment on you and your reasonable prices. Thank You for not trying to milk every dime and allowing normal buyers a chance. 👍


Zero jab at anyone here by the way.

 

Hello Bell Saint Louis.
Did you get the PMs I sent?
Let's talk about the specific trunk trim pieces I'm interested in. I think I see 3 or 4 of them. Please call me to discuss.

Looks like you have other Olds parts?
We have a decent classified section here where you can list all of the parts you have to sell.
Rules to post are:
1. Snap good pictures (include the common rust areas like the lower door seams),
2. Clear descriptions of parts, e.g. dented, rusted, mint, driver quality etc...
3. Your shipping location,
4. Most importantly asking prices,

You will move a lot of inventory here.