parting out '71 S, nice frame, & floors, more
Thread Starter
Registered User
Joined: Sep 2010
Posts: 4,859
From: Indianapolis
Chris,
I've got a few nice ones. Do you need just the cable or also the bracket for the back of the carb also? I've got them also. Give me a call if you want.
Thanks.
Scott
C. 317-727-7041
I've got a few nice ones. Do you need just the cable or also the bracket for the back of the carb also? I've got them also. Give me a call if you want.
Thanks.
Scott
C. 317-727-7041
Registered User
Joined: Aug 2010
Posts: 25
Here are a few pictures of what I could get to tonight. The mirror worked as soon as I put power to it. The black could use a freshening up. The glass is pretty nice, but not perfect. The wire has one nick in it at the top of the stem. a little liquid tape should fix it though. Otherwise a nice piece.
Front of hood trim pieces for a '71 also.
Nicest wiper escutcheon I could find.
When you say chrome piece are you talking about the aluminum wide part on the bottom outer edge of the drivers quarter window? About 3/4" wide & gets wider toward the back of the window? It has a matching part at the bottom of the drivers door glass? If so, I'll get a picture of that, probably tomorrow.
I know I have a canister bracket, I'll have to check its condition & get a picture or two on here in the next day or two. Also, I'll check on the bolts & rubber piece for you.
Front of hood trim pieces for a '71 also.
Nicest wiper escutcheon I could find.
When you say chrome piece are you talking about the aluminum wide part on the bottom outer edge of the drivers quarter window? About 3/4" wide & gets wider toward the back of the window? It has a matching part at the bottom of the drivers door glass? If so, I'll get a picture of that, probably tomorrow.
I know I have a canister bracket, I'll have to check its condition & get a picture or two on here in the next day or two. Also, I'll check on the bolts & rubber piece for you.
Did this rear view mirror sell?If not I'm interested how much?
Registered User
Joined: Sep 2009
Posts: 1,450
From: Hamilton, ON
Forgot about this thread. Below is the vapor canister bracket (pictured on 1st page of thread) I got from Scott a while back. Had it powdercoated and it turned out pretty good.
Last edited by oldzy; Oct 22, 2011 at 07:52 PM.
Thread Starter
Registered User
Joined: Sep 2010
Posts: 4,859
From: Indianapolis
Frank C, we have several '71-'72 hoods in stock, plain no vents, side vents only, rear vents only, rear & side vents, no '70 hoods, or OAI hoods, they're on backorder.
Boh2k, We have several '70-'72 mirrors in stock, stainless front, black front, lighted, non lighted. Let me know what you're looking for & we'll work something out. I'll see if I have another one like this one also.
Dallas*fan, Have to check, might have one in blue, if not, pretty sure I have other colors & you can always paint/dye them. I'll let you know. I have a few am only radios, Haven't tested them, but i can, I'll get pix also.
Oldzy, Thanks for the kind words & your business! Let me know if you need anything else.
I've got tons of other little detail stuff, *****, lenses, specific screws, fasteners, alternator positive plastic caps, horn relay positive plastic caps, correct flasher *****, tons of dash parts, clips, some cruise stuff, power window wiring & motors, glove box doors, AC ducts, some convertible stuff, Vista parts & glass, owners manuals in the plastic sleeves, some with POP, LOTS more.
Boh2k, We have several '70-'72 mirrors in stock, stainless front, black front, lighted, non lighted. Let me know what you're looking for & we'll work something out. I'll see if I have another one like this one also.
Dallas*fan, Have to check, might have one in blue, if not, pretty sure I have other colors & you can always paint/dye them. I'll let you know. I have a few am only radios, Haven't tested them, but i can, I'll get pix also.
Oldzy, Thanks for the kind words & your business! Let me know if you need anything else.
I've got tons of other little detail stuff, *****, lenses, specific screws, fasteners, alternator positive plastic caps, horn relay positive plastic caps, correct flasher *****, tons of dash parts, clips, some cruise stuff, power window wiring & motors, glove box doors, AC ducts, some convertible stuff, Vista parts & glass, owners manuals in the plastic sleeves, some with POP, LOTS more.
Registered User
Joined: Apr 2011
Posts: 51
From: Vacaville California
Thanks packrat.any color is fine,will paint.am radio working or not is fine just want to fill the space in the dash.may need the crome looking trim that outlines the dash,and small **** for the dualgate lockout if possible.shipping to 95687
stetzie
Joined: Dec 2010
Posts: 207
From: New Lisbon, Wisconsin
HEI Dist. Plugs
Hi,
Parting out a '71 S. It was a complete car when we started & we still have most of it left. It is a basic 350 4bbl, th350 car. Bench seat, AC, blue paint & interior, drum brakes, light package & not much else. Floors look to be very nice, package tray area looks nice, but I haven't pulled the glass yet, front cowl under the windshield looks very nice with just some minor surface rust & no rust through anywhere. Pass fender is very fixable with only very small rust through at usual bottom rear, brace on back is very nice.SOLD Pass door is very nice also with no rust seen other than very light surface rust at bottom inner seams, no bulging, or bubbling though.SOLD plain flat steel hood is good, trunk lid is very nice with no rust, bulging seams, or damage. drivers fender & door were sideswiped. They are fixable, but probably not worth it. Drivers door has no rust, just beat up, maybe a good candidate for reskinning? Quarters are rusty & damaged. Blue dash pad has one crack, otherwise nice. Radio holes are unmolested. All ac ducts & components are there, nice condensor, lines, & brackets also. Core support has a little rust under battery tray, not real bad, not real nice. Headlight housings & bezels are nice. Stone shield is junk, front & rear bumpers are decent/straight cores, all lenses & housings are good/ok, All glass is good, blue bench seat is ripped/torn, good core, back seat is good core also. Have all 4 14" bolt on cap SS II rims. single track 10 bolt rearend, 350 engine has a knock in it when cranked over, sounds like something is loose & banging around in the oil pan???? Was told by previous owner that it had been rebuilt at some point, maybe something came loose?? I've never heard an engine make the sound it's making. Supposedly we had a buyer for the frame, so we removed the body & engine trans already.FRAME SOLD So most parts are ready to go, or can be made that way shortly.
All parts are located on the east side of Indianapolis, Indiana. You can come pick them up, or I can ship them also. I've got tons of other '70-'72 parts also, nothing too rare or valuable though.
Call Scott for info. & prices.
C. 317-727-7041
Parting out a '71 S. It was a complete car when we started & we still have most of it left. It is a basic 350 4bbl, th350 car. Bench seat, AC, blue paint & interior, drum brakes, light package & not much else. Floors look to be very nice, package tray area looks nice, but I haven't pulled the glass yet, front cowl under the windshield looks very nice with just some minor surface rust & no rust through anywhere. Pass fender is very fixable with only very small rust through at usual bottom rear, brace on back is very nice.SOLD Pass door is very nice also with no rust seen other than very light surface rust at bottom inner seams, no bulging, or bubbling though.SOLD plain flat steel hood is good, trunk lid is very nice with no rust, bulging seams, or damage. drivers fender & door were sideswiped. They are fixable, but probably not worth it. Drivers door has no rust, just beat up, maybe a good candidate for reskinning? Quarters are rusty & damaged. Blue dash pad has one crack, otherwise nice. Radio holes are unmolested. All ac ducts & components are there, nice condensor, lines, & brackets also. Core support has a little rust under battery tray, not real bad, not real nice. Headlight housings & bezels are nice. Stone shield is junk, front & rear bumpers are decent/straight cores, all lenses & housings are good/ok, All glass is good, blue bench seat is ripped/torn, good core, back seat is good core also. Have all 4 14" bolt on cap SS II rims. single track 10 bolt rearend, 350 engine has a knock in it when cranked over, sounds like something is loose & banging around in the oil pan???? Was told by previous owner that it had been rebuilt at some point, maybe something came loose?? I've never heard an engine make the sound it's making. Supposedly we had a buyer for the frame, so we removed the body & engine trans already.FRAME SOLD So most parts are ready to go, or can be made that way shortly.
All parts are located on the east side of Indianapolis, Indiana. You can come pick them up, or I can ship them also. I've got tons of other '70-'72 parts also, nothing too rare or valuable though.
Call Scott for info. & prices.
C. 317-727-7041
Anything on the HEI connectors yet?
Stetzie
Thread
Thread Starter
Forum
Replies
Last Post
boese1978
Major Builds & Projects
1
Jan 22, 2012 02:34 PM
