Parting out 1967 F-85 / Cutlass
#1
Parting out 1967 F-85 / Cutlass
I am going to go ahead and post the car now instead of waiting like I usually do. Since it's a four door I am sure nobody will buy it complete. Asking $2000.00 for the complete car if someone does want it.
This is a solid vehicle with plenty of nice driver quality parts. There are no mint parts on this car, althought the dash pad is perfect (it's even soft). There is one small crack in the dash above the speaker. The steering wheel has a few cracks in it. They're hard to see in the pictures.
This is real barn find that was stored in a barn in North Alabama for the last twenty-three years or so. (Last registered in 1991) All original, complete, with maybe 141,000 on the odometer, very little rust, A/C car, Am Radio, In-dash clock, very cool universal bumper jack (not original to this car).
Does not run / Engine will need a rebuild / As will the tramsmission
Call, text or PM me with your questions.
The car is located in Birmingham Alabama.
Deal Pending on the dash pad and dash.
Tom
(910) 224-1210
This is a solid vehicle with plenty of nice driver quality parts. There are no mint parts on this car, althought the dash pad is perfect (it's even soft). There is one small crack in the dash above the speaker. The steering wheel has a few cracks in it. They're hard to see in the pictures.
This is real barn find that was stored in a barn in North Alabama for the last twenty-three years or so. (Last registered in 1991) All original, complete, with maybe 141,000 on the odometer, very little rust, A/C car, Am Radio, In-dash clock, very cool universal bumper jack (not original to this car).
Does not run / Engine will need a rebuild / As will the tramsmission
Call, text or PM me with your questions.
The car is located in Birmingham Alabama.
Deal Pending on the dash pad and dash.
Tom
(910) 224-1210
Last edited by Olds442redberet; March 9th, 2015 at 06:20 PM.
#2
You can never have enough pictures.
It is a four door, that's what makes it's such a nice donor car.
Driver fender looks great. The passenger fender needs a small patch in the lower rear. Rust free doors and trunk. I haven't seen the top side of the floors yet, but the underneath looks great. No obvious issues. The trunk floor has a couple of small areas of concern, nothing major.
The front bumper has one minor dent that I only found when I was cleaning it up. It's a great core or a decent driver. The rear bumper was destroyed by an ill placed chain. I didn't do it!
It is a four door, that's what makes it's such a nice donor car.
Driver fender looks great. The passenger fender needs a small patch in the lower rear. Rust free doors and trunk. I haven't seen the top side of the floors yet, but the underneath looks great. No obvious issues. The trunk floor has a couple of small areas of concern, nothing major.
The front bumper has one minor dent that I only found when I was cleaning it up. It's a great core or a decent driver. The rear bumper was destroyed by an ill placed chain. I didn't do it!
#5
I like the way you do business. I think it is only right to honor the first one to contact you, whether it is by phone, private message, or on your listing. I lost out on a OAI air cleaner top because the seller did not check his messages, and sold it on the phone.
Last edited by kjr442; March 9th, 2015 at 09:31 PM.
#6
I started taking the car apart today. I finally got a chance to use my snap on impact screw driver. I needed it to pull the rear doors. Those darn screws on on there tight.
Good driver quality parts:
Sun visors $40.00 for the pair
Rearview mirror $35.00
Door mirror $25.00
Rear doors $45.00 each
Front doors $45.00 each
Hood $200.00
Bumper $100.00
Trunk lid $200.00
Dash Pad "Sale pending"
Dash "Sale Pending"
Ignition switch $45.00
Lighter $25.00
Light switch $35.00
Rear Light housings $50.00 pair
Good driver quality parts:
Sun visors $40.00 for the pair
Rearview mirror $35.00
Door mirror $25.00
Rear doors $45.00 each
Front doors $45.00 each
Hood $200.00
Bumper $100.00
Trunk lid $200.00
Dash Pad "Sale pending"
Dash "Sale Pending"
Ignition switch $45.00
Lighter $25.00
Light switch $35.00
Rear Light housings $50.00 pair
Last edited by Olds442redberet; April 5th, 2015 at 05:02 PM.
#9
I'd be interested in the steering wheel, center cap, horn buttons.
Horns themselves.
Possibly radiator, if 3 core. If it has a tag, could you tell me what it is? Cap too.
Vacuum can plastic thing on the firewall.
Those parking light lenses.
Radio ***** (4) if you want to rob that AM radio of them.
Center rear view mirror if still avail.
AC compressor if it's somewhere.
Horns themselves.
Possibly radiator, if 3 core. If it has a tag, could you tell me what it is? Cap too.
Vacuum can plastic thing on the firewall.
Those parking light lenses.
Radio ***** (4) if you want to rob that AM radio of them.
Center rear view mirror if still avail.
AC compressor if it's somewhere.
#13
Tom,
I am interested in the jack, assuming it is the original and common with the 2door HT for a 67 Cutlass. Also the jack hold down bracket clamp assy.
See picture below. I need this chrome bolt and the one with the larger dia washer that bolt to the vent window on the front side of door panel. The one shown below is on the rear of the door and is for the window track.
Thanks,
Jeff Sims
I am interested in the jack, assuming it is the original and common with the 2door HT for a 67 Cutlass. Also the jack hold down bracket clamp assy.
See picture below. I need this chrome bolt and the one with the larger dia washer that bolt to the vent window on the front side of door panel. The one shown below is on the rear of the door and is for the window track.
Thanks,
Jeff Sims
#25
The front clear lens are sold already.
I have one good lower rear lens, it's clear. I have the two upper red lens as well.
Send me a Pm with your email address and I'll send you detailed pictures.
thanks
I have one good lower rear lens, it's clear. I have the two upper red lens as well.
Send me a Pm with your email address and I'll send you detailed pictures.
thanks
#31
I'm in need of 1966 oldsmobile 330 alternator bracket pieces. The one with a/c.I'm need of all the pieces with bolts. Thanks! Can be reached at chance_gypsy@yahoo.com
#32
Throttle mechanism
Looking for the throttle mechanism that goes through the firewall. White nylon roller where the gas pedal slides should be spinning and no flat spot. Mine frozen and flat spotted. UGH! Switch or throttle rod no big deal. Mine good. Pic would be great. Located in south Alabama. 251-945-1966
#37
Hello, I need the part that the bottom of the window sets in and the regulator track, where the regulator roller rides in, should be attached to each other, passenger side front door, please email me at olznut@aol.com thanks, Ed