I am going to go ahead and post the car now instead of waiting like I usually do. Since it's a four door I am sure nobody will buy it complete. Asking $2000.00 for the complete car if someone does want it.

This is a solid vehicle with plenty of nice driver quality parts. There are no mint parts on this car, althought the dash pad is perfect (it's even soft). There is one small crack in the dash above the speaker. The steering wheel has a few cracks in it. They're hard to see in the pictures.

This is real barn find that was stored in a barn in North Alabama for the last twenty-three years or so. (Last registered in 1991) All original, complete, with maybe 141,000 on the odometer, very little rust, A/C car, Am Radio, In-dash clock, very cool universal bumper jack (not original to this car).

Does not run / Engine will need a rebuild / As will the tramsmission

Call, text or PM me with your questions.

The car is located in Birmingham Alabama.

Deal Pending on the dash pad and dash.

Tom
(910) 224-1210

 

You can never have enough pictures.

It is a four door, that's what makes it's such a nice donor car.

Driver fender looks great. The passenger fender needs a small patch in the lower rear. Rust free doors and trunk. I haven't seen the top side of the floors yet, but the underneath looks great. No obvious issues. The trunk floor has a couple of small areas of concern, nothing major.

The front bumper has one minor dent that I only found when I was cleaning it up. It's a great core or a decent driver. The rear bumper was destroyed by an ill placed chain. I didn't do it!

 

I am interested in your dash pad. You mention a crack "in the dash". Is that in the dash face, or the pad? What kind of price? Thanks!

 

I recieved a call before you on the dash pad and the dash. I am sorry.

 

I like the way you do business. I think it is only right to honor the first one to contact you, whether it is by phone, private message, or on your listing. I lost out on a OAI air cleaner top because the seller did not check his messages, and sold it on the phone.

 

I started taking the car apart today. I finally got a chance to use my snap on impact screw driver. I needed it to pull the rear doors. Those darn screws on on there tight.

Good driver quality parts:
Sun visors $40.00 for the pair
Rearview mirror $35.00
Door mirror $25.00

Rear doors $45.00 each
Front doors $45.00 each
Hood $200.00
Bumper $100.00
Trunk lid $200.00
Dash Pad "Sale pending"
Dash "Sale Pending"
Ignition switch $45.00
Lighter $25.00
Light switch $35.00
Rear Light housings $50.00 pair

 

You have a pm.

 

PM Sent

 

I'd be interested in the steering wheel, center cap, horn buttons.
Horns themselves.
Possibly radiator, if 3 core. If it has a tag, could you tell me what it is? Cap too.
Vacuum can plastic thing on the firewall.
Those parking light lenses.
Radio ***** (4) if you want to rob that AM radio of them.
Center rear view mirror if still avail.
AC compressor if it's somewhere.

 

No horns.
No A/C compressor
The steering wheel has a few cracks in it.

PMs sent

 

Here's a few more pictures of some of the parts I've pulled so far.

 

You have a new pm.I will take it.

 

Tom,

I am interested in the jack, assuming it is the original and common with the 2door HT for a 67 Cutlass. Also the jack hold down bracket clamp assy.

See picture below. I need this chrome bolt and the one with the larger dia washer that bolt to the vent window on the front side of door panel. The one shown below is on the rear of the door and is for the window track.

Thanks,
Jeff Sims

 

Sorry, just read the comment about the universal jack. Still interested the other stuff.

 

I am going to double check to see if I have a 1967 bumper hook.

The bolts should still be on the car.

 

Sending pm

 

I've got this car tore down pretty far. Hopefully I'll have it completely tore apart by the end of this week.
It has a really nice frame, cowl and rear lower quarters.

 

Tom, I got all packages, haven't opened them yet.

 

Excellent!
But please open them soon. Let's make sure nothing got damaged during shipping.

Thanks

 

Hi, I'm looking for a lower tail light lens cover/drivers side. Would you still have it?

 

Why yes I do, The passenger side lens is broken but the driver's side is still on the car.

 

I am boxing up all of the parts as I pull them in order to better find them later.

 

Well if it's in relatively good shape I would like to purchase it. Would you be able to send me a picture of it and price. Thanks

 

I am interested in the sun visors, the backup lenses, and the clear lenses that go in the headlight bezels. I see $40 for the visors, how much for the lenses? Thanks!

 

The front clear lens are sold already.

I have one good lower rear lens, it's clear. I have the two upper red lens as well.

Send me a Pm with your email address and I'll send you detailed pictures.

thanks

 

Sending a PM

 

Hello:
Looking for battery tray and all hold down parts if they are in good shape, I plan to blast and paint them anyway, so as long as they are not rusted out.
Thanks, Ron

 

Hey, just wanted to say I got the parts today and they look like new! Thanks for everything!

 

Excellent!
Thanks for the up date and I hope they help out with your build.

 

Still plenty of parts left on this car.

 

I'm in need of 1966 oldsmobile 330 alternator bracket pieces. The one with a/c.I'm need of all the pieces with bolts. Thanks! Can be reached at chance_gypsy@yahoo.com

 

Looking for the throttle mechanism that goes through the firewall. White nylon roller where the gas pedal slides should be spinning and no flat spot. Mine frozen and flat spotted. UGH! Switch or throttle rod no big deal. Mine good. Pic would be great. Located in south Alabama. 251-945-1966

 

I'm also in need of the passenger mirror if possible and the starter heat shield .Thanks!

 

Sorry

No passenger mirror

No heat shield.

 

Lots of good parts left from this car.

 

Rec'd throttle assy. Switch pitch switch worked. Roller nice and round. Lubed it up. Haven't installed yet. Thanks for getting it to me.


George in south Alabama

 

Hello, I need the part that the bottom of the window sets in and the regulator track, where the regulator roller rides in, should be attached to each other, passenger side front door, please email me at olznut@aol.com thanks, Ed

 

Ed,
I have it

 

Do you still have parts from this car? Is it a bench seat? I am looking for the armrest finishing caps shown in this picture.

 

Sorry,
I've been out for awhile.

I do not have that piece for the seat.