Edelbrock Performer Intake Big Block Olds
#1
Edelbrock Performer Intake Big Block Olds
Edelbrock PN 2151
Includes carburetor mounting studs, Edelbrock aluminum washers, and several brass NPT pipe plugs.
Some light surface corrosion/oxidation. All threaded ports are clean and tight.
55 thou milled off each intake gasket flange. No material has been removed for port matching.
$299 + SH SOLD
Attempting to answer some questions on fitment.
Was on a 455 with 25 thou removed from the deck + iron heads with no milling + 45 thou head gaskets. Fit perfectly with the replacement ~60 thou thick composite intake gaskets.
Completely stock block and heads? This intake probably will not fit.
Have milled some material off your block deck or cylinder heads? Using steel shim head gaskets? This intake probably will fit depending on how much material removed and what gasket you use. Message me your milling numbers, head gasket, and intake gasket and I can try to better determine fit.
Includes carburetor mounting studs, Edelbrock aluminum washers, and several brass NPT pipe plugs.
Some light surface corrosion/oxidation. All threaded ports are clean and tight.
55 thou milled off each intake gasket flange. No material has been removed for port matching.
Attempting to answer some questions on fitment.
Was on a 455 with 25 thou removed from the deck + iron heads with no milling + 45 thou head gaskets. Fit perfectly with the replacement ~60 thou thick composite intake gaskets.
Completely stock block and heads? This intake probably will not fit.
Have milled some material off your block deck or cylinder heads? Using steel shim head gaskets? This intake probably will fit depending on how much material removed and what gasket you use. Message me your milling numbers, head gasket, and intake gasket and I can try to better determine fit.
Last edited by th3ric3m4n; August 11th, 2024 at 10:38 AM.
Thread
Thread Starter
Forum
Replies
Last Post