B-body wagon parts blowout
#1
B-body wagon parts blowout
There's been no interest in a package deal, so the two wagons are being parted out before scrapping. Everything is in Lovettsville, VA, which is about 50 miles NW from Washington DC and about 90 minutes south of Carlisle, PA. If I have time to remove parts, I might get them to Spring Carlisle. I might also be able to transport to OCA Nationals.
Here are the main parts. I do have two complete cars (1984 Custom Cruiser and 1986 Caprice wagon), so I have pretty much all the small parts.
1980-1990 Custom Cruiser front fenders, one pair straight and rust free, and one additional passenger side that has an easily repaired dent. CC fenders are unique to the wagons and do not fit sedans. $50 each for the good ones, $25 for the dented one.
Oldsmobile aluminum hood and hinges, fits 1980-90 RWD B/C-body cars. $100
1980-1990 B-body wagon doors. These are rust-free, pretty much straight, and have power windows. They are from the Caprice but fit all 77-90 B-body wagons. They do have peeling woodgrain and the Chevy woodgrain trim. $50 each.
1977-1990 B-body wagon rear bumper. SOLD
1977-1990 B-body wagon rear bumper fillers, aftermarket ABS. SOLD
1977-1990 B-body wagon NOS GM tailgate outer window sweep. SOLD
1977-1990 door outer window sweeps, Chinesium from JC Whitney. $20/set
1977-1990 B-body wagon door weatherstripping. SOLD
8.5" anti-spin wagon rear axle. Ratio in the high-2.xx. Brakes not included. The wagon axle is wider than the sedan axle and will not fit sedans. $150
8.5" open wagon axle. Ratio about 2.73:1. Brakes not included. $75
Fiberglass wagon tailgate, fits 1977-90. Needs fiberglass work around the outside handle. Includes glass, motor, and good (non-sagging) LH hinges. $150
Metal wagon tailgate shell, fits 1977-90. Straight, rust-free, just the shell. $50
Metal wagon tailgate, fits 1977-90. Rust-free, small dent, has CHMSL. Includes window and motor. $75
1986 Caprice nose, complete (except for the front bumper filler panel). Rust free (some surface rust on hood), some dents on hood. Crack in grille. $150
Olds factory gauge panel fits 1977-90 RWD B/C-body. $50
Caprice factory gauge panel. $50
Roll of dark blue headliner material and adhesive, enough to do a wagon. $30
Ford Excursion roof rack. The Excursion rack is exactly the same width as the factory GM rack, but it has low-profile tracks with removable crossbars. All you need to do is shorten the tracks before bolting to the roof. $30
Bolt-on Class III trailer hitch, fits 1977-90 B-body wagon. $30
Four BFG 235/70-15 T/As on aluminum five spoke wheels from a Chevy pickup (15x7, 5 x 5" bolt circle). The tires have about 70% tread on them. Includes the 1/2" lug nuts. $125 for the four mounted or I can unmount and sell the tires for $100 and the wheels for $40. Tires SOLD, wheels available
Any small parts you might need - let me know.
Use my direct email for a faster response. joe_padavano@rocketmail.com
Here are the main parts. I do have two complete cars (1984 Custom Cruiser and 1986 Caprice wagon), so I have pretty much all the small parts.
1980-1990 Custom Cruiser front fenders, one pair straight and rust free, and one additional passenger side that has an easily repaired dent. CC fenders are unique to the wagons and do not fit sedans. $50 each for the good ones, $25 for the dented one.
Oldsmobile aluminum hood and hinges, fits 1980-90 RWD B/C-body cars. $100
1980-1990 B-body wagon doors. These are rust-free, pretty much straight, and have power windows. They are from the Caprice but fit all 77-90 B-body wagons. They do have peeling woodgrain and the Chevy woodgrain trim. $50 each.
1977-1990 B-body wagon rear bumper. SOLD
1977-1990 B-body wagon rear bumper fillers, aftermarket ABS. SOLD
1977-1990 B-body wagon NOS GM tailgate outer window sweep. SOLD
1977-1990 door outer window sweeps, Chinesium from JC Whitney. $20/set
1977-1990 B-body wagon door weatherstripping. SOLD
8.5" anti-spin wagon rear axle. Ratio in the high-2.xx. Brakes not included. The wagon axle is wider than the sedan axle and will not fit sedans. $150
8.5" open wagon axle. Ratio about 2.73:1. Brakes not included. $75
Fiberglass wagon tailgate, fits 1977-90. Needs fiberglass work around the outside handle. Includes glass, motor, and good (non-sagging) LH hinges. $150
Metal wagon tailgate shell, fits 1977-90. Straight, rust-free, just the shell. $50
Metal wagon tailgate, fits 1977-90. Rust-free, small dent, has CHMSL. Includes window and motor. $75
1986 Caprice nose, complete (except for the front bumper filler panel). Rust free (some surface rust on hood), some dents on hood. Crack in grille. $150
Olds factory gauge panel fits 1977-90 RWD B/C-body. $50
Caprice factory gauge panel. $50
Roll of dark blue headliner material and adhesive, enough to do a wagon. $30
Ford Excursion roof rack. The Excursion rack is exactly the same width as the factory GM rack, but it has low-profile tracks with removable crossbars. All you need to do is shorten the tracks before bolting to the roof. $30
Bolt-on Class III trailer hitch, fits 1977-90 B-body wagon. $30
Four BFG 235/70-15 T/As on aluminum five spoke wheels from a Chevy pickup (15x7, 5 x 5" bolt circle). The tires have about 70% tread on them. Includes the 1/2" lug nuts. $125 for the four mounted or I can unmount and sell the tires for $100 and the wheels for $40. Tires SOLD, wheels available
Any small parts you might need - let me know.
Use my direct email for a faster response. joe_padavano@rocketmail.com
Last edited by joe_padavano; April 21st, 2014 at 08:37 AM. Reason: Update for parts sold
#3
#4
Do you know if the Custom Cruiser dash pad is the same as an Eighty Eight dash pad? Also, I may be interested in the tires if someone does not purchase the rims/tires as a package.
Last edited by anthonyP; April 10th, 2014 at 11:38 AM.
#5
First one with cash gets the tires. I'll be bringing them to Carlisle otherwise, and don't plan to bring them home.
#11
Thread
Thread Starter
Forum
Replies
Last Post
The Stickman
Brakes/Hydraulic Systems
9
December 6th, 2008 03:20 PM