70 Cutlass parts
#1
70 Cutlass parts
I bought a 70 Cutlass 2dr hardtop for parts that is pretty rusty. It is a complete car with to many good parts to name. It does have a complete set of tinted glass. I have a 69 2dr post so some of the parts won't work for me. If there are parts that anyone needs I'll check the condition and take them off. I can cut out sheet metal panels as well. The car is in Upstate SC. The hood is already taken. Here are some photos.
Thanks
70Oldsmobile06.jpg
70Oldsmobile05.jpg
70Oldsmobile04.jpg
70Oldsmobile03.jpg
70Oldsmobile02.jpg
70Oldsmobile01.jpg
Thanks
70Oldsmobile06.jpg
70Oldsmobile05.jpg
70Oldsmobile04.jpg
70Oldsmobile03.jpg
70Oldsmobile02.jpg
70Oldsmobile01.jpg
#2
Taz, I could use the two kick panels with the two cables if it is not an A/C car. I also need the jack with the bumper hook and the plastic defroster 'Y' that goes on top of the heater assembly that the two defroster hoses attach to.
Thanks, Joe
Thanks, Joe
#5
I need the air in the tires. Is it correct for 1970? Sorry. Couldn't help myself.
I'll probably think of something other than the washer bottle and get back to you.
I'll probably think of something other than the washer bottle and get back to you.
Last edited by 344870M; October 20th, 2007 at 08:47 AM. Reason: gramatical error
#12
h-bomb,
I'm not sure about the hood. Side by side they look the same. I think they changed in
71.
The trunk lid only has surface rust on top but in the lower corners underneath there are small holes rusted thru where the rubber bumpstops are. It is still a very usable piece for $40.
I'm not sure about the hood. Side by side they look the same. I think they changed in
71.
The trunk lid only has surface rust on top but in the lower corners underneath there are small holes rusted thru where the rubber bumpstops are. It is still a very usable piece for $40.
#15
1970 Olds Parts Needed
Looking for the Fender Braces for the front fenders and also the Fender Assy's for both fenders. these are the bushings ect that hold the bottom of the fenders to the frame by the doors at the bottom of the fenders.
#17
They won't. '69 and '70 are one year only.
Page 12 of Fusicks Catalog shows them for $42.00 each.
Norm
Page 12 of Fusicks Catalog shows them for $42.00 each.
Norm
#18
Parts
Greetings. I am restoring a 1970 olds cutlass and looking for the Fender Braces for the front fenders, (both). Send me a email at info@desertjava.biz if you have them.
thanks
John
thanks
John
#20
Hey guys,
I still have the 70 Cutlass body but when I have had time to look for the parts the weather hasn't been cooperative for being outside. The car is not at my house so that hasn't helped either.
I still have the 70 Cutlass body but when I have had time to look for the parts the weather hasn't been cooperative for being outside. The car is not at my house so that hasn't helped either.
#21
heater/ac duct work
i need the heater/ac duct work all or part let me know my email is brice42642@yahoo.com thanks
Last edited by brice; March 30th, 2008 at 05:58 PM.
#29
Here's a link to pics of some of the parts I have off the car. I'll be adding pics as I can so be patient. Like I said, the car is not at my house. I apologize for not responding to requests sooner but I have other projects ongoing plus family, work and just plain getting slower with age.
Thanks
http://s221.photobucket.com/albums/d...tlass%20parts/
Thanks
http://s221.photobucket.com/albums/d...tlass%20parts/
Last edited by Taz; December 5th, 2008 at 07:34 AM. Reason: forgot to add link
#33
Clock and Wiring
Sorry, it didn't have a clock but I have the blank where the clock would have been.
If anyone in the southeast needs some of the parts off this Cutlass that would be expensive to ship I might be able to meet you in Pigeon Forge,TN some weekend. I could set you up with a two night stay for free if you would be willing to attend a timeshare presentation. I have done this in the past and it worked out very well. They provide a nice place to stay and usually kick in some other perks like meals or show tickets.
If anyone in the southeast needs some of the parts off this Cutlass that would be expensive to ship I might be able to meet you in Pigeon Forge,TN some weekend. I could set you up with a two night stay for free if you would be willing to attend a timeshare presentation. I have done this in the past and it worked out very well. They provide a nice place to stay and usually kick in some other perks like meals or show tickets.
Last edited by Taz; December 5th, 2008 at 03:15 PM.
#34
Taz,
Check the latch on the hood. I have seen comments on other forums that the 69 and 70 hoods have different latch mechanisms that aren't mixable. Also, the tongue may be shorter on the 69 than on the 70 (if I remember correctly).
Check the latch on the hood. I have seen comments on other forums that the 69 and 70 hoods have different latch mechanisms that aren't mixable. Also, the tongue may be shorter on the 69 than on the 70 (if I remember correctly).
#37
More pics now @ http://s221.photobucket.com/albums/d...tlass%20parts/
#40
do you have a disc brake setup on this cutlass??
I bought a 70 Cutlass 2dr hardtop for parts that is pretty rusty. It is a complete car with to many good parts to name. It does have a complete set of tinted glass. I have a 69 2dr post so some of the parts won't work for me. If there are parts that anyone needs I'll check the condition and take them off. I can cut out sheet metal panels as well. The car is in Upstate SC. The hood is already taken. Here are some photos.
Thanks
Thanks