1967 fan shroud and hardware
#1
1967 fan shroud and hardware
We are Parting out a fairly complete 67 330 switch pitch 400? vista cruiser thats rusty out back around the glass
here is a start.............
ac fan shroud that is SWEET ... just needs detailed ... no cracks ,scrapes or issues stripped holes etc
includes original paint top plate
lower brackets and hardware from shroud to core support NO pitting and original bolts
thin flat side rubber gaskets with clips and overflow hose bracket clip all originals
lower plastic deflector 4"x 30"ish . SUPER nice ... no bolts sorry
these are really nice survivor parts
no radiator it was stolen along with alternator and fan and w pump pulley
all shroud parts are 450 shipped
Scott
2o6-465-9165 till 10 pm pacific
yes they are dirty ,, but never painted or damaged .... ready for the 80,000
mile survivor
or detail for a show car....
here is a start.............
ac fan shroud that is SWEET ... just needs detailed ... no cracks ,scrapes or issues stripped holes etc
includes original paint top plate
lower brackets and hardware from shroud to core support NO pitting and original bolts
thin flat side rubber gaskets with clips and overflow hose bracket clip all originals
lower plastic deflector 4"x 30"ish . SUPER nice ... no bolts sorry
these are really nice survivor parts
no radiator it was stolen along with alternator and fan and w pump pulley
all shroud parts are 450 shipped
Scott
2o6-465-9165 till 10 pm pacific
yes they are dirty ,, but never painted or damaged .... ready for the 80,000
mile survivor
or detail for a show car....
Last edited by 72455442RA; November 14th, 2017 at 01:01 AM.
#6
power seat
the power seat works fine
with a switch from my power bucket seat ...
it works 3 ways with the switch and clicks in the up direction
works fine with my other switch...
switch probably needs cleaned or adjusted ....
NOT from a wet rusty car ... only lite surface haze ...
switch has a few pits ...
seat track is 750 shipped
with the super rare plastic trim
and the floor mounting brackets
with a switch from my power bucket seat ...
it works 3 ways with the switch and clicks in the up direction
works fine with my other switch...
switch probably needs cleaned or adjusted ....
NOT from a wet rusty car ... only lite surface haze ...
switch has a few pits ...
seat track is 750 shipped
with the super rare plastic trim
and the floor mounting brackets
Last edited by 72455442RA; November 29th, 2017 at 02:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Bee Saint Louis
Parts For Sale
1
July 5th, 2019 08:58 PM
rhett838
General Questions
4
July 9th, 2015 07:38 AM
Giddy
Parts Wanted
1
March 10th, 2009 11:37 AM