1972 cutlass window trim
May 29th, 2012, 05:35 PM
#1
Registered User
Thread Starter
Join Date: Dec 2010
Location: San Francisco, CA
Posts: 46
1972 cutlass window trim
hey guys i was wonderin if i could get some help on where to find the front and rear window chrome for my baby. i would also appreciate it if someone could tell me what a fair price to pay someone if i could find it locally. any and all advice is appreciated
Last edited by CalBear; May 29th, 2012 at 06:35 PM.
May 29th, 2012, 06:37 PM
#2
Registered User
Thread Starter
Join Date: Dec 2010
Location: San Francisco, CA
Posts: 46
June 3rd, 2012, 06:04 PM
#3
Registered User
Join Date: Dec 2005
Posts: 511
Keep an on Ebay. Seems to be a lot out there. It's usually in pretty good shape since the location of these mouldings are not as susceptible to scratches and dents as are the door and quarter mouldings. I buffed mine out after a repaint and they came out very nice. Chumley
June 3rd, 2012, 06:11 PM
#4
Moderator
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,808
I may have some up in Oregon. So your needing the stainless that goes around both the front and rear windshields, correct? Anything else?
If you haven't created a parts wanted thread yet I'd encourage you to do that. There's several members here with spare parts and one of the other guys may be able to find the parts quicker than I could. Organization is not one of my strong points!
John
If you haven't created a parts wanted thread yet I'd encourage you to do that. There's several members here with spare parts and one of the other guys may be able to find the parts quicker than I could. Organization is not one of my strong points!
John
June 5th, 2012, 08:44 AM
#8
Registered User
Join Date: May 2008
Location: Austin, Texas
Posts: 3,246
The rear glass stainless isn't repro'd to my knowledge
>The driprail channel stainless is reproduced and available from Fusick for the Cutlass S body style (don't know if they repro the Supreme body style)
>The windshield stainless is repro'd and available from some vendors such as Ames Performance Engineering (Pontiac repro parts vendor).....not cheap ($100 for 3 windshield pieces + $145 for the wide stainless at the base of the windshield...+ shipping which may be oversize).
RUN A PARTS WANTED AD (AS ALREADY SUGGESTED BY 2BLU442 ABOVE) and see what you come up with. There should be A LOT of the rear glass pieces out there as well as windshield sets. Driprail stainless can be found used as well but many times the stuff is pretty dinged up, etc.
>The driprail channel stainless is reproduced and available from Fusick for the Cutlass S body style (don't know if they repro the Supreme body style)
>The windshield stainless is repro'd and available from some vendors such as Ames Performance Engineering (Pontiac repro parts vendor).....not cheap ($100 for 3 windshield pieces + $145 for the wide stainless at the base of the windshield...+ shipping which may be oversize).
RUN A PARTS WANTED AD (AS ALREADY SUGGESTED BY 2BLU442 ABOVE) and see what you come up with. There should be A LOT of the rear glass pieces out there as well as windshield sets. Driprail stainless can be found used as well but many times the stuff is pretty dinged up, etc.
Last edited by 70Post; June 5th, 2012 at 08:55 AM.
Thread
Thread Starter
Forum
Replies
Last Post
oldspackrat
Parts For Sale
11
June 14th, 2022 08:06 PM
BR[]
Parts Wanted
0
October 31st, 2010 08:56 AM
