ClassicOldsmobile.com

Notices
General Questions Place to post your questions that don't fit into one of the specific forums below.

Determining if 45 or 39 degree with intake off

Thread Tools
 
Search this Thread
 
Old August 16th, 2009 | 12:05 PM
  #1  
nickd's Avatar
nickd
Thread Starter
Registered User
 
Joined: Mar 2009
Posts: 66
Determining if 45 or 39 degree with intake off
Not sure if this is correct but seems right don't know if this pic is on this site or not.
Reply
Old August 17th, 2009 | 10:11 AM
  #2  
joe_padavano's Avatar
joe_padavano
Old(s) Fart
 
Joined: Mar 2007
Posts: 48,401
From: Northern VA
Originally Posted by nickd
Not sure if this is correct but seems right don't know if this pic is on this site or not.
Sure looks right.
Reply
Old August 18th, 2009 | 07:31 AM
  #3  
Oldsguy's Avatar
Oldsguy
Past Administrator
 
Joined: May 2004
Posts: 10,189
From: Rural Waxahachie Texas
Do you measure between the red lines? What are the measurements? If they are there I can't read them.
Reply
Old August 18th, 2009 | 11:30 AM
  #4  
nickd's Avatar
nickd
Thread Starter
Registered User
 
Joined: Mar 2009
Posts: 66
There not there but looks like you can visually tell
Reply
Old August 18th, 2009 | 11:41 AM
  #5  
Oldsguy's Avatar
Oldsguy
Past Administrator
 
Joined: May 2004
Posts: 10,189
From: Rural Waxahachie Texas
If you had two engine side by side you could. But if you only had one and wanted to measure it.....
Reply
Old August 18th, 2009 | 03:36 PM
  #6  
nickd's Avatar
nickd
Thread Starter
Registered User
 
Joined: Mar 2009
Posts: 66
The 39 degree looks like it has the same measurement on three sides the 45 degree is thicker on the top then the sides
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Newbie several thousand miles away from potential car - Need help determining value
Zrzoun
The Newbie Forum
26
July 24th, 2015 11:40 AM
Determining how much is too much rust on a frame?
molasses4masses
Chassis/Body/Frame
12
January 13th, 2014 11:04 AM
Determining rear end ratio
Bitburger
General Discussion
3
January 16th, 2013 04:57 PM
Determining 442 color/options rarity - 1971
Goat Cop
442
8
September 9th, 2011 04:39 PM
Determining '85 Toronado's build date
Greg McDonnell
Toronado
1
November 9th, 2008 12:48 PM
Back to Subforum
General Questions
View Next Unread
Edelbrock 1406 problem?




Advanced Search

All times are GMT -7. The time now is 04:20 PM.