Installing chrome insets onto armrest base
#1
Installing chrome insets onto armrest base
Does anyone know how to install the chrome insets onto the driver/passenger side doors on a 72 cutlass convertible?
I can take some pics, but basically its the 12" chrome insert that fits into the beveled area on the armrest attached to the door. Like in this pic (see link)
http://i227.photobucket.com/albums/d...2056_p15_l.jpg
The back of the inset has three "hooks" for lack of a better word. They are actually more like tabs with pointed edges. Two tabs face right, the last faces left.
Again, I can photograph if necessary but seems like a common install, just not sure if I need clips or what.
thanks in advance!
I can take some pics, but basically its the 12" chrome insert that fits into the beveled area on the armrest attached to the door. Like in this pic (see link)
http://i227.photobucket.com/albums/d...2056_p15_l.jpg
The back of the inset has three "hooks" for lack of a better word. They are actually more like tabs with pointed edges. Two tabs face right, the last faces left.
Again, I can photograph if necessary but seems like a common install, just not sure if I need clips or what.
thanks in advance!
#2
I just did this yesterday. Straighten the tabs and centre the stainless piece where you want it and mark the armrest. You then drill the appropriate size holes and push the tabs through and bend them over. That's it.
Thread
Thread Starter
Forum
Replies
Last Post
Arrowstorm
Body work
1
September 16th, 2014 07:39 PM
1968Cutlassfallbrook
Body & Paint
4
December 13th, 2010 06:30 PM