Build sheet database
January 12th, 2012 | 06:48 AM
#52
"Car"mudgeon
Joined: Feb 2011
Posts: 5,191
From: Perry, GA
You are exactly right. He had a 67 442 loaded as well, but he wanted the 72 to be a 442 but Oldsmobile wouldn't badge it as so, which is pretty much all was missing was the 442 badges and grilles since it did have the OAI hood, FE2 suspension, posi rear, big block and the dual gate. He ordered it ultimately for my Grandmother that unfortunately passed away in 77, so I inherited it with around 65,000 original miles on her and now she is at 85,000 original miles. I have the protect-o-plate, misc correspondence with Oldsmobile and other docs that I found in some boxes of his stuff. Thanks for inquiring. 
Scot
Scot
January 16th, 2012 | 01:04 PM
#53
Registered User
Joined: Dec 2009
Posts: 85
From: SOCAL/951
Does anyone have the guys info, I want to see if I could get my build sheet/window sticker done. Pulled it from under the tank yesterday and its in bad shape.
34257OZ143004
Fremont California
Delivered to Kaiser Bros on Figueroa Los Angeles.
Googled the dealer and it appears they are in the same location since the 40's, now selling Hondas.
http://m1187.photobucket.com/albums/Toddthe1/
Last edited by Insom; January 16th, 2012 at 01:21 PM.
January 16th, 2012 | 09:16 PM
#57
Registered User
Joined: Jan 2010
Posts: 1,507
From: duncan bc
February 29th, 2012 | 07:16 AM
#60
Sammy70 455 Supreme
Joined: Dec 2011
Posts: 3,069
From: Port Perry, Ontario
Olds registry
Hi All: I am trying to build a database of buildsheets for Cutlasses. At first I was concentrating on just the 1970 SX, but I would like to expand it to any Cutlass.
If you have a copy of your build sheet, could you send it to me in jpg or pdf format? If you have a photo of the car that would be great too (jsut one).
Thanks, Peter
If you have a copy of your build sheet, could you send it to me in jpg or pdf format? If you have a photo of the car that would be great too (jsut one).
Thanks, Peter
Ted
Kind of hard to read
[/IMG]
[/IMG]
February 17th, 2015 | 02:27 AM
#72
Registered User
Joined: Feb 2015
Posts: 10
From: Newport, TN
I have 5 used window stickers and blank window stickers for 1977-1985 Olds. and also have 163 buildsheets for GM cars. I colleted them from juck cars. they are under the front seat or the back seat. It's the last thing they put in.
February 17th, 2015 | 09:54 AM
#73
"Car"mudgeon
Joined: Feb 2011
Posts: 5,191
From: Perry, GA
Try to post some of the older ones when you can 
December 16th, 2015 | 03:31 PM
#76
Registered User
Joined: Nov 2015
Posts: 111
From: mass
Del I'm buying a 1970 Lansing built cutlass convertible,where should I be looking fo
December 16th, 2015 | 03:38 PM
#78
Old School Olds
Joined: Nov 2008
Posts: 9,044
From: Marble Falls TX
Welcome Ash, good luck finding a build sheet on a Lansing built car. Few and far between.
Places to check: top of gas tank, under the carpet, behind or under the back seat 'in the springs', in the headliner, if a bucket seat car, behind the plastic seat backs. There may be a few other places, but these seem to be your best bet. Best of luck.
Places to check: top of gas tank, under the carpet, behind or under the back seat 'in the springs', in the headliner, if a bucket seat car, behind the plastic seat backs. There may be a few other places, but these seem to be your best bet. Best of luck.
December 16th, 2015 | 04:23 PM
#79
Registered User
Joined: Dec 2011
Posts: 300
From: Jackson, Michigan
Welcome Ash, good luck finding a build sheet on a Lansing built car. Few and far between.
Places to check: top of gas tank, under the carpet, behind or under the back seat 'in the springs', in the headliner, if a bucket seat car, behind the plastic seat backs. There may be a few other places, but these seem to be your best bet. Best of luck.
Places to check: top of gas tank, under the carpet, behind or under the back seat 'in the springs', in the headliner, if a bucket seat car, behind the plastic seat backs. There may be a few other places, but these seem to be your best bet. Best of luck.
