fusebox(rusted)
May 11th, 2006, 04:37 AM
#2
Past Administrator
Join Date: May 2004
Location: Rural Waxahachie Texas
Posts: 10,010
There should be a diagram of that in your owner's manual. If you don't have one, maybe you can find one at the junk yard. Aren't there markings on the new one you installed? Maybe what you mean is you need a wiring diagram that shows color codes for all the circuits. I bought one for my '69 on the internet for a couple of bucks. It came rolled up in a tube.
May 11th, 2006, 06:22 AM
#3
Registered User
Thread Starter
Join Date: May 2006
Posts: 2
Hey Oldsguy,
I am trying to cut cost so i went to the local advance auto and purchased two generic blade style blocks and wired them in. The problem is i cant read what the old box says for the right side,there are three.the top right is panel lights.....the two under it are smaller in length and unreadable.
I am trying to cut cost so i went to the local advance auto and purchased two generic blade style blocks and wired them in. The problem is i cant read what the old box says for the right side,there are three.the top right is panel lights.....the two under it are smaller in length and unreadable.
Thread
Thread Starter
Forum
Replies
Last Post
GrammasPride
Drivetrain/Differentials
4
September 4th, 2007 10:14 PM
