I'm needing a photo of the power seat feed, which is next to the relay located in the driver's side foot panel. I'm working on a 1965 Oldsmobile 98 sedan and the previous owner cut all of red-with-white-stripe wires that provide 12v to the window switches. So I'm looking at around 7 wires that need to be connected together somehow.

Here is the diagram from the Body By Fisher manual, 1966, page 11-3. If someone can provide a photo of the area around item B and C, it would be greatly appreciated.

 

Well, without having a clue about how this is supposed to look, I went ahead with my best solution. The junction block takes the 12v feed wire coming from the relay and distributes the power to six wires. Four goes to each window switch, one goes to the power seat and the final wire I don't have a clue what it's for but I connected it anyways. I know this mod may upset some of the purists but it's the best I could do with what resources I have available.