Center link for '64 Jetstar Convertible?
March 25th, 2010, 09:51 PM
#1
Registered User
Thread Starter
Join Date: May 2007
Location: South Central Wisconsin
Posts: 29
Center link for '64 Jetstar Convertible?
I am freshening up the front end of my 1964 Jetstar convertible. I have all the parts I need except the elusive center link, which has the ends facing opposites directions.
Please respond with "sure things" not guesses, as I have chased too many ghost on this. I REALLY would appreciate a solid lead. Thank you!
- Smooth
Please respond with "sure things" not guesses, as I have chased too many ghost on this. I REALLY would appreciate a solid lead. Thank you!
- Smooth
March 25th, 2010, 10:05 PM
#2
Ebay!!!!
I am freshening up the front end of my 1964 Jetstar convertible. I have all the parts I need except the elusive center link, which has the ends facing opposites directions.
Please respond with "sure things" not guesses, as I have chased too many ghost on this. I REALLY would appreciate a solid lead. Thank you!
- Smooth
Please respond with "sure things" not guesses, as I have chased too many ghost on this. I REALLY would appreciate a solid lead. Thank you!
- Smooth
March 25th, 2010, 10:08 PM
#3
Ebay!!!!
I am freshening up the front end of my 1964 Jetstar convertible. I have all the parts I need except the elusive center link, which has the ends facing opposites directions.
Please respond with "sure things" not guesses, as I have chased too many ghost on this. I REALLY would appreciate a solid lead. Thank you!
- Smooth
Please respond with "sure things" not guesses, as I have chased too many ghost on this. I REALLY would appreciate a solid lead. Thank you!
- Smooth
March 25th, 2010, 10:31 PM
#4
Registered User
Thread Starter
Join Date: May 2007
Location: South Central Wisconsin
Posts: 29
FYI the obvious
I have checked the obvious places like ebay. Many are listed, but they are wrong. I even bought one before I really looked at how this is put together.
This center link has the ends pointing in OPPOSITE DIRECTIONS.
Overall, it would be great to know who supports Oldsmobile wear items in general... but on this right now, any direct link would mean a lot.
Thank you!!!
- Smooth
This center link has the ends pointing in OPPOSITE DIRECTIONS.
Overall, it would be great to know who supports Oldsmobile wear items in general... but on this right now, any direct link would mean a lot.
Thank you!!!
- Smooth
Last edited by Smooth; March 25th, 2010 at 10:38 PM. Reason: More info
March 25th, 2010, 11:36 PM
#5
Registered User
Join Date: Nov 2007
Location: Grassie Ontario Canada
Posts: 253
Have you tried Kanter? I have never dealt with them myself but maybe somebody here who has can comment.
http://www.kanter.com///productdetai...Cat=14&Prc=103
http://www.kanter.com///productdetai...Cat=14&Prc=103
March 26th, 2010, 12:06 AM
#6
Registered User
Thread Starter
Join Date: May 2007
Location: South Central Wisconsin
Posts: 29
KANTER - Yes, I had seen this...
Yes, I had seen this, and I have heard they are great to deal with, thank you.
However, I was holding out for a better deal somewhere. I have a parts car for the exchange, I just don't want to deal with removing the one on the parts car to save on the $100 deposit... then do it all over again on my driver. I will if this is the only option. I just think it sucks they hose ya for $280 plus the deposit. Then the one below it for the Cutlas is $130.
It might be like my mom always said, "Just shut up and take it." <lol>
I hope not... Still would like to find a NOS or a reasonable new supplier.
- Smooth
However, I was holding out for a better deal somewhere. I have a parts car for the exchange, I just don't want to deal with removing the one on the parts car to save on the $100 deposit... then do it all over again on my driver. I will if this is the only option. I just think it sucks they hose ya for $280 plus the deposit. Then the one below it for the Cutlas is $130.
It might be like my mom always said, "Just shut up and take it." <lol>
I hope not... Still would like to find a NOS or a reasonable new supplier.
- Smooth
March 27th, 2010, 12:47 PM
#7
Warm weather is comin'
Yes, I had seen this, and I have heard they are great to deal with, thank you.
However, I was holding out for a better deal somewhere. I have a parts car for the exchange, I just don't want to deal with removing the one on the parts car to save on the $100 deposit... then do it all over again on my driver. I will if this is the only option. I just think it sucks they hose ya for $280 plus the deposit. Then the one below it for the Cutlas is $130.
It might be like my mom always said, "Just shut up and take it." <lol>
I hope not... Still would like to find a NOS or a reasonable new supplier.
- Smooth
However, I was holding out for a better deal somewhere. I have a parts car for the exchange, I just don't want to deal with removing the one on the parts car to save on the $100 deposit... then do it all over again on my driver. I will if this is the only option. I just think it sucks they hose ya for $280 plus the deposit. Then the one below it for the Cutlas is $130.
It might be like my mom always said, "Just shut up and take it." <lol>
I hope not... Still would like to find a NOS or a reasonable new supplier.
- Smooth
Something like your mom would say: Buck Up and buy the damn thing or you'll never get it on the road!!!
Thread
Thread Starter
Forum
Replies
Last Post
BILL DEMMER
Chassis/Body/Frame
34
June 8th, 2021 11:45 PM
