1978 Cutlass Roller
#1
1978 Cutlass Roller
Any interest in a 1978 Cutlass? Selling it as a roller.. No motor/trans. Stock 2.29 peg leg rear. Complete interior. Bench seat. column shift. Beige interior color. American Racing Wheels. New front/rear Moog springs.. ( 5662/5413) New KYB Shocks. Front end is tight. Stock Driveshaft. Crossmember. A/C car, but no A/C parts except what is on the firewall. New heater core. Good Glass. Nice beige vinyl top. Roll up windows.
Will need a headliner.. I have a new roll of material I will include. Could use a carpet and seat re-upholster. No rips, just dirty. Everything works electrically. Trunk is solid. Frame is solid. Has a patch on the P/S floor pan. Will need a patch on the driver side floor pan. Rear seat pan solid. Radiator support solid. Good gas tank.. New front & rear brakes, including drums & rotors, calipers and rubber lines.. New proportioning valve put in like a year ago. As well as master cylinder. Small rust spot bubbling up by the quarter window and a minor crease/scratch on one quarter panel from some idiot. No exhaust. Overall, nice car.. but I need money to put towards a house..
Asking $750. If you are interested in the power window setup I have that I pulled from an '87 Cutlass, as well as the (blue) bucket seats & console, I will do $1000 and I will throw in the 3.73 rear I have also. Came from a Monte SS. Non-posi, but complete. $1200 And I will leave the new Stainless Steel Pypes dual exhaust with X-pipe and side exit tips.
Take it as it sits, with the LS1/4l60e and $3500 takes it all. Motor & trans are in, needs the fuel system done and wiring and all the small stuff. (electric ls1 fans, fuel pump,harness,sending unit, lines, headers,exhaust all included.)
If you are interested in it with the motor, PM me your email and I will send all the pics/info I have.
this was before I replaced the rear springs, shows the right side of the car:
Driver side, how it sat with the stock sbc motor:
LS1:
(pics in a few)
Will need a headliner.. I have a new roll of material I will include. Could use a carpet and seat re-upholster. No rips, just dirty. Everything works electrically. Trunk is solid. Frame is solid. Has a patch on the P/S floor pan. Will need a patch on the driver side floor pan. Rear seat pan solid. Radiator support solid. Good gas tank.. New front & rear brakes, including drums & rotors, calipers and rubber lines.. New proportioning valve put in like a year ago. As well as master cylinder. Small rust spot bubbling up by the quarter window and a minor crease/scratch on one quarter panel from some idiot. No exhaust. Overall, nice car.. but I need money to put towards a house..
Asking $750. If you are interested in the power window setup I have that I pulled from an '87 Cutlass, as well as the (blue) bucket seats & console, I will do $1000 and I will throw in the 3.73 rear I have also. Came from a Monte SS. Non-posi, but complete. $1200 And I will leave the new Stainless Steel Pypes dual exhaust with X-pipe and side exit tips.
Take it as it sits, with the LS1/4l60e and $3500 takes it all. Motor & trans are in, needs the fuel system done and wiring and all the small stuff. (electric ls1 fans, fuel pump,harness,sending unit, lines, headers,exhaust all included.)
If you are interested in it with the motor, PM me your email and I will send all the pics/info I have.
this was before I replaced the rear springs, shows the right side of the car:
Driver side, how it sat with the stock sbc motor:
LS1:
(pics in a few)
Last edited by speedaddict78; October 31st, 2013 at 07:17 AM.
#4
For some reason I am having an issue with photobucket, so I am going to link my ad on craigslist for the details on the motor & what exactly is included.
http://hudsonvalley.craigslist.org/pts/4160854655.html
http://hudsonvalley.craigslist.org/pts/4160854655.html
Thread
Thread Starter
Forum
Replies
Last Post
lunaboy
Cars For Sale
5
November 30th, 2009 06:42 PM