New SS Brake Lines Installed on 75 Cutlass
Thread Starter
Registered User
Joined: Jan 2011
Posts: 277
From: Paris, Ontario, Canada
New SS Brake Lines Installed on 75 Cutlass
I can tell you it wasn’t an easy job replacing the rotted steel brake line from the proportional valve to the rubber flex line above the diff. Replaced both lines to each rear wheel cyl,s and both rear wheel cylinders. Didnt remove the dual hump cross member or anything else. It’s a tough spot above the mufflers where the flex attached to the frame.
Anyways , all done and brakes are bled and a stiff neck.
Prebent lines from Inline worked great.
Anyways , all done and brakes are bled and a stiff neck.
Prebent lines from Inline worked great.
Last edited by Tuffnut; Dec 30, 2022 at 11:33 AM.
Registered User
Joined: Nov 2014
Posts: 1,554
From: Cincinnati, Ohio
I can tell you it wasn’t an easy job replacing the rotted steel brake line from the proportional valve to the rubber flex line above the diff. Replaced both lines to each rear wheel cyl,s and both rear wheel cylinders. Didnt remove the dual hump cross member or anything else. It’s a tough spot above the mufflers where the flex attached to the frame.
Anyways , all done and brakes are bled and a stiff neck.
Prebent lines from Inline worked great.
Anyways , all done and brakes are bled and a stiff neck.
Prebent lines from Inline worked great.
Thread
Thread Starter
Forum
Replies
Last Post
