booster/master cylinder 72 delta 88
Thread Starter
Registered User
Joined: Dec 2017
Posts: 22
booster/master cylinder 72 delta 88
I am trying to replace the master cylinder and booster on my 72 Delta 88 convertible. From what I have determined there was both a 9" bendix booster and a delco booster. It seems there was also an 11" booster. The 9" bendix booster being black, and the 9" delco gold anodized. It also appears there were several variation of master cylinders available. Thus far I have been unable to find the 9" Bendix, which is what I believe I have. Are they interchangeable? Can anyone help sort this out? Thanks, Roy
MOTORHEAD
Joined: Feb 2011
Posts: 7,949
From: minnesota USA
There are places that rebuild power brake boosters
master cylinders any more that is what I am going to do
rock auto will have inexpensive brake parts If you are OK with that
There are many places that sell new bolt on kits for olds cars
master cylinders any more that is what I am going to do
rock auto will have inexpensive brake parts If you are OK with that
There are many places that sell new bolt on kits for olds cars
MOTORHEAD
Joined: Feb 2011
Posts: 7,949
From: minnesota USA
All the best there! CHEERS
When I was into Toronado and other hard to find models
Brake place had it in stock... Good Olds days
https://brakeandequipment.com/
When I was into Toronado and other hard to find models
Brake place had it in stock... Good Olds days
https://brakeandequipment.com/
Thread
Thread Starter
Forum
Replies
Last Post
Lively72 olds cutlass 442
General Discussion
3
May 7, 2015 07:52 PM
bluecab
Brakes/Hydraulic Systems
2
Apr 15, 2015 05:27 AM
