Hi all. I hit a little snag. Doing the brake lines on a 70 442 conv. I got the brake lines from Inline Tube. The brake lines are not meeting up to the distribution block. I've attached some pictures. I probably have to do some bending myself. I'm also thinking that I might have to shorten the brake line to the rear and re flare it at the distribution block. When I got the car, I didn't take reference pictures because the block wasn't attached to the frame and completely bent away, all the brake lines were also bent. I was hoping someone can share reference pictures of how the block is attached to the frame and also the brake lines going to the block. Also, I don't have the bracket. If someone has an extra, please let me know. Thank you!

 

A certain amount of tweaking is always necessary. Be careful and don't pinch the lines, and you should be fine.