wilder

well i dug out my 425 today and its in overall pretty good shape since it has been in storage for the last 5-6 years. cylinder walls look great no rust! Still will probably take it apart it give it a nice cleaning before putting into the car! Dont mind the mess!

425-1.jpg
425-1.jpg

425-2.jpg

425-3.jpg

425-4.jpg

citcapp

Is it stock or built to some degree? Like the valve covers

wilder

Testing my memory now!

It’s built up pretty good
It’s a 425 30 over
High volume meiling oil pump port match to the main cap
Cut the main caps and added the straps using ARP studs
Upper and lower custom windage trays
Cam is a Comp cams part #42-000-5
240@.050 intake
246@.050 exhaust
Cloyes double roller
I degreed the cam
Comp cams lifters and pushrod
Can’t remember what rockers just remember they was high dollar will have to pull the valve cover to find out
Edelbrock performer heads also had the block drilled for 1/2 studs
Edelbrock intake with 850 Holley
All MSD electronic ign

Also did some modifications to the oil system
Did I leave anything out?