Does any know about what headers I can use with a bbo in a b-body car? I have only this on pics, but don't know what they are from ,
(I have not tried this yet btw) does headers have a product nr on the headers somewhere I can find?
sorry bad pic
PC052200_zps4c000b64.jpg

 

from Jchicago

Hedman 58150 Headers are a perfect fit.
A 200c crossmember is the same as a th350.
93-96 9c1 Caprice dual hump crossmembers will bolt right in, but 700R4's have a different trans mounting scheme. You will have to trim the front hump off a Caprice crossmember, and possibly modify the ears where they mount to the frame if you want to run a th350. It may be more trouble than modifying a stock th350 crossmember. If you want to run stock exhaust manifolds, you will will most likely have the easiest time blocking off the back passenger bung by welding it shut, and running the exhaust down from where the crossover pipe was.

http://www.oldspower.com/vb/showthre...t=delta+header

 

Thanks for tip, crossmember Will not be a problem, i Just think my headers Will fit bad maybe in the engineroom, But i Will check out the headman 58150 headers if i need to modify my headers much if so.

 

Hi again, do you know if i need a ministarter for the hedman 58150? Or will them crash into the big starter.. I have not order the headers yet.

 

Unknown, but I can let you know in a few weeks when I do my 330 in my Delta.

I'll be running a SBO though

 

OK thanks, i guess i have the engine still out that time. Maybe i will just buy the headman for sure anyway and sell the old ones, but i dont know what they are from