ClassicOldsmobile.com
A couple of big old Olds
A couple of big old Olds
0 2017/12/06 19:20:33
'66 Big Cars
'66 Big Cars
0 2017/12/06 19:22:26
0 2019/07/02 12:00:04
0 2019/07/03 15:16:31
0 2019/07/03 15:16:51
Quadrajet power piston spring selection. Firmer springs = richer quicker; less firm leaner longer
Quadrajet power piston spring selection. Firmer springs = richer quicker; less firm leaner longer
0 2019/07/30 06:25:05
74-76 Eldo coolant overflow tank in 66 Big Olds
74-76 Eldo coolant overflow tank in 66 Big Olds
0 2019/08/07 02:55:55
74-76 Eldo coolant overflow tank in 66 Big Olds
74-76 Eldo coolant overflow tank in 66 Big Olds
0 2019/08/07 02:56:47
74-76 Caddy Eldorado coolant overflow tank in 66 Olds big car. Letters colored with a fat sharpie
74-76 Caddy Eldorado coolant overflow tank in 66 Olds big car. Letters colored with a fat sharpie
0 2019/08/07 02:57:38
1966 big car with 17058553 quadrajet and handmade hardlines
1966 big car with 17058553 quadrajet and handmade hardlines
0 2019/08/07 03:31:08
1966 98 with 17058553 quadrajet, HEI, and hand made hardlines
1966 98 with 17058553 quadrajet, HEI, and hand made hardlines
0 2019/08/07 03:33:13
Best stuff to stick new weatherstripping on. Also great, because when you need to take it off, they have a remover which solves it cleanly.
Best stuff to stick new weatherstripping on. Also great, because when you need to take it off, they have a remover which solves it cleanly.
0 2019/09/07 16:29:55
Cleanly removes 3m weatherstrip adhesive.
Cleanly removes 3m weatherstrip adhesive.
0 2019/09/07 16:32:37
Works o.k. in place of Olds tool J22191, which I'd have no idea where to find.
Works o.k. in place of Olds tool J22191, which I'd have no idea where to find.
0 2019/09/13 13:14:38
Double Nut > tightening nut > washer > big washer > guide shims > PVC with notch at the bottom
Double Nut > tightening nut > washer > big washer > guide shims > PVC with notch at the bottom
0 2019/09/13 13:22:20
Measures AFR in both cylinder banks. Frankly 1 bank will do for carb tuning, but having 2 helped me chase down a brake booster vacuum leak.
Measures AFR in both cylinder banks. Frankly 1 bank will do for carb tuning, but having 2 helped me chase down a brake booster vacuum leak.
0 2019/09/16 16:55:54
1966 Starfire Bucket Seat - no locks
1966 Starfire Bucket Seat - no locks
0 2019/09/29 18:20:37
1966 Oldsmobile 88/98/Starfire tilt & telescoping steering wheel
1966 Oldsmobile 88/98/Starfire tilt & telescoping steering wheel
0 2019/09/29 18:45:35
Works with lead/acid & AGM batteries. Shows the charge level. Won't charge unless it's hooked up correctly.
Works with lead/acid & AGM batteries. Shows the charge level. Won't charge unless it's hooked up correctly.
0 2019/09/29 18:55:21
Install date marked; Field and Sensor wires labeled to avoid reversing.
Install date marked; Field and Sensor wires labeled to avoid reversing.
0 2019/09/29 19:06:28
65-66 Big car A/C ducts & seals. Eventually they get old and leak. In and out...
65-66 Big car A/C ducts & seals. Eventually they get old and leak. In and out...
0 2019/10/20 20:08:36
'66 A/C assembly, sprayed with Krylon satin black, new 3/16's seals between the ducts and Klasse vinyl protectant to make plastics look good.
'66 A/C assembly, sprayed with Krylon satin black, new 3/16's seals between the ducts and Klasse vinyl protectant to make plastics look good.
0 2019/10/20 20:45:27
DIY Window Roller Rivet Driver Kit. Be sure the rivet is facing the right way before you drive it.
DIY Window Roller Rivet Driver Kit. Be sure the rivet is facing the right way before you drive it.
0 2019/10/24 08:43:49
A good way to remove old rear window channel insulation. Use in a ventilated area.
A good way to remove old rear window channel insulation. Use in a ventilated area.
0 2019/10/24 09:00:07
Is the outside of the rear channel the right place for this stamped steel part?
Is the outside of the rear channel the right place for this stamped steel part?
0 2019/10/24 09:27:43
Where does this slider go?
Where does this slider go?
0 2019/10/24 09:31:05
Should this sliding ear be bolted to the front window stop?
Should this sliding ear be bolted to the front window stop?
0 2019/10/24 09:39:09
Driver's side: is this where the steel ear goes?
Driver's side: is this where the steel ear goes?
0 2019/10/24 09:47:22
Or should the ear be in the front channel?
Or should the ear be in the front channel?
0 2019/10/24 09:47:54
Typical glass retention bolts with rubber isolator on top. Typical slotted-end channel screws.
Typical glass retention bolts with rubber isolator on top. Typical slotted-end channel screws.
0 2019/10/30 09:34:34
'66 Big Car driver door. Use a 7/16"s socket to adjust windows
'66 Big Car driver door. Use a 7/16"s socket to adjust windows
0 2019/10/30 11:34:03
Typical GM Mid-60's window hardware
Typical GM Mid-60's window hardware
0 2019/10/30 11:37:03
Add another seal to your Olds. Cadillac did this in the 60's, so we're not too far from factory. Just upgrading...
Add another seal to your Olds. Cadillac did this in the 60's, so we're not too far from factory. Just upgrading...
0 2019/11/12 19:15:07
Typical GM convertible top frame. Functional, but not all that quiet by modern standards.
Typical GM convertible top frame. Functional, but not all that quiet by modern standards.
0 2019/11/12 19:20:46
Trimlok 1.75" flap seal installed on frame rail. Invisible when top is up, but doesn't want to stay in place. 3" length flap seal is on order to get it to tuck in on top of the top pads without intervention.
Trimlok 1.75" flap seal installed on frame rail. Invisible when top is up, but doesn't want to stay in place. 3" length flap seal is on order to get it to tuck in on top of the top pads without intervention.
0 2019/11/12 19:21:41
U channel sticks the bulb seal to the trailing vertical edge of the front fender. Mostly unseen, but seems to help quiet these old cars.
U channel sticks the bulb seal to the trailing vertical edge of the front fender. Mostly unseen, but seems to help quiet these old cars.
0 2019/11/12 19:29:04
'68 88 at Turners Auto Salvage, Section 4 (i think). Interior not too bad, blue if I recall. Front drums as you can see.
'68 88 at Turners Auto Salvage, Section 4 (i think). Interior not too bad, blue if I recall. Front drums as you can see.
0 2019/11/24 18:16:48
'66 98 Ambulance Conversion. Made in Arkansas found its way to CA over the years. Probably retired in the '70's based on it's blue plate
'66 98 Ambulance Conversion. Made in Arkansas found its way to CA over the years. Probably retired in the '70's based on it's blue plate
0 2019/11/24 18:22:50
1965 Cadillac door jamb cover. Should be a decent starter template for an Olds, Pontiac or other GM's.
1965 Cadillac door jamb cover. Should be a decent starter template for an Olds, Pontiac or other GM's.
0 2019/11/24 21:26:33
These covers were metal. This one shows surface rust. 60's nice, not plastic.
These covers were metal. This one shows surface rust. 60's nice, not plastic.
0 2019/11/24 21:27:49