68-72 A Body w 295/65/15's ?
Thread Starter
Registered User
Joined: Sep 2011
Posts: 357
68-72 A Body w 295/65/15's ?
Anyone have any pics of their 68-72 A Bodies while running
295/65/15's ?
Don't reply unless u r running this specific size tire under your 68-72 A Body Cutlass, Chevelle etc...
Give your rim size also.
295/65/15's ?
Don't reply unless u r running this specific size tire under your 68-72 A Body Cutlass, Chevelle etc...
Give your rim size also.
Moderator
Joined: Sep 2006
Posts: 14,244
From: Medford, Oregon
Hi Manny
I've never run this exact size so I didn't respond to your last message. The way you worded it seemed a little harsh.
But I have run 295/50/15's on 15X10" rims and the tires rubbed on the inside when I cornered hard or drove into a downtown parking lot, across the ramp over the sidewalk which caused the body to roll. I have also run 275/50/15 on the same 15X10 wheels and didn't have any problems with them rubbing. The wheels were custom built with zero offset, the center of the wheel was right at the center of the outer ring. I'd encourage you to take measurements considering the body roll before mounting these tires. John
I've never run this exact size so I didn't respond to your last message. The way you worded it seemed a little harsh.
But I have run 295/50/15's on 15X10" rims and the tires rubbed on the inside when I cornered hard or drove into a downtown parking lot, across the ramp over the sidewalk which caused the body to roll. I have also run 275/50/15 on the same 15X10 wheels and didn't have any problems with them rubbing. The wheels were custom built with zero offset, the center of the wheel was right at the center of the outer ring. I'd encourage you to take measurements considering the body roll before mounting these tires. John
Thread
Thread Starter
Forum
Replies
Last Post
jensenracing77
Drivetrain/Differentials
12
May 17, 2017 07:39 AM
