joe am tired of jumping from one engine to another on the decision of which one! going to stay with the 330 four barrell in my 65 cutlass which is in excelent shape. but has a mechanical cam that am tired of adjusting and hearing the thing making the, am out of oil sounds all the time, So am going to the TCI 350 auto hard shift. wanting to install the lunutti voodo cam, dont know how to fiquare which one, as am wanting a good lumpy idel, no racing at all, I have a 355 posi in the rear with a junk monkey jetaway. also have the offenhauser 360 dual four intake [new] with 500 cfm eldelbrock carbs, one with choke. running 15 inch rims,havent bought the torque converter yet till I know the cam, would like around a 318 to 322 duration with I think around .490 lift? maybe, hoping you would help with the picking of the cam. I know to remove the oil plugs in the lifter vally, can I use the stock push rods? maybe roller rockers?have tall, no baffels alum valve cover's from uniquet really getting lost in all of this as Iam reentering the car scean after 21 years but still have my buternut yellow 2 dr post cutlass out of nc.