replacement front control arms '73 delta 88
#41
hey
yes the camaro link was just to show u pics of rusted arms conditions.
i bought the one from the links above this:
http://www.ebay.com/itm/NOS-Chevy-Bu...b04c5e&vxp=mtr
yes the camaro link was just to show u pics of rusted arms conditions.
i bought the one from the links above this:
http://www.ebay.com/itm/NOS-Chevy-Bu...b04c5e&vxp=mtr
#43
So new Problem.
I think about replacing also all Bolts in Germany its hard to find non mectic screws
Found a set on summit that seems matching, can somebody confirm that ?
http://www.summitracing.com/dom/part...ake/oldsmobile
In GErmany i can get these but they dont have the shape like in attached file the red arrow
http://www.zollshop.de/de/Zollschrau...-gelb-verzinkt
alex
I think about replacing also all Bolts in Germany its hard to find non mectic screws
Found a set on summit that seems matching, can somebody confirm that ?
http://www.summitracing.com/dom/part...ake/oldsmobile
In GErmany i can get these but they dont have the shape like in attached file the red arrow
http://www.zollshop.de/de/Zollschrau...-gelb-verzinkt
alex
Last edited by delta_88_germany; March 19th, 2014 at 05:06 AM.
#44
AMK has them: Page 22, top right item, $5.00 each, so not too much more (if you add shipping) than the wrong bolt at Zollshop.
Summit's bolts aren't right, because they don;t have shoulders either:
- Eric
Summit's bolts aren't right, because they don;t have shoulders either:
- Eric
#45
hey eric
ATK is awesome :-) Bolts orderd never heared from them ... may cause their website is so 1990:-)
so my control arm is just in the customs clearence in germany and i got the first parts from powder coating back as you can see on pics.
Prolem is they coated also the seat of the shaft seal ring (see pictures)
so the dring is very hard to turn.
Is this normal or shoud i polish the seat ? normally sealring seats shoudl be polished...
alex
ATK is awesome :-) Bolts orderd never heared from them ... may cause their website is so 1990:-)
so my control arm is just in the customs clearence in germany and i got the first parts from powder coating back as you can see on pics.
Prolem is they coated also the seat of the shaft seal ring (see pictures)
so the dring is very hard to turn.
Is this normal or shoud i polish the seat ? normally sealring seats shoudl be polished...
alex
Thread
Thread Starter
Forum
Replies
Last Post
DR_DAN
Parts For Sale
0
March 9th, 2015 05:48 PM
jpaulwhite
Parts Wanted
4
July 22nd, 2010 07:01 AM