Good day. Oldsmobile Omega 1980 V6 2.8L. My car and I are living in the Netherlands.
I have disassembled the intake manifold because it was leaking. It has been fitted with new gaskets, as well as those of the valve covers. Tomorrow I will install the carburetor. I disconnected many hoses, and a few were already hanging loose. The hoses I disconnected I have marked, so I will be able to find those connections again. In any case,
I would like to correctly connect all the vacuum hoses to the various valves.
My Service Manual contains a nice diagram, but I cannot properly match the English names to the components I see under the hood.

Is there anywhere I can find images/photos/videos that show me exactly where each hose goes?
Thanks in advance!

 

Which ones do you not recognize ? Or post some closeup pictures of your engine showing the parts and we can try to identify them for you.

 

Thanks Bill. Ihave here some pictures

There are 3 sensors: Yellow, green and blue

No 1 isn't connected

No 2 Blue is open too

3-way vacuum on the intake manifold. No 3 is open.
I hope this makes it clearer and someone knows how I can connet the different hoses.

 

Thank you! It does not matter anymore. I took everything out. Except for ignition, brakes and PCv.