Exhaust help
#41
I'm going to be running a re-built rocket 350 with a muncie 4-speed & headers, and my question is are there going to be any special difficulties/modifications that will need to be done (aside from the ones listed above) for headers with the manual transmission? Or is it pretty much the same as doing the automatic? Thanks!
http://www.jegs.com/InstallationInst...0/520-3901.pdf
Adam
#42
The only issue you might have is one of the header pipes coming in contact with the z-bar.I know the old Doug Thorley's will clear,and some of the Hooker's will.
I have also been told that if you use a Chevelle z-bar in a Cutlass,it will clear the headers better,but I have never tried this,so I don't know.I did modify one of my z-bars,by moving the fork arm over towards the center,to clear a large set of pipes before.
I have also been told that if you use a Chevelle z-bar in a Cutlass,it will clear the headers better,but I have never tried this,so I don't know.I did modify one of my z-bars,by moving the fork arm over towards the center,to clear a large set of pipes before.
Thread
Thread Starter
Forum
Replies
Last Post
2blu442
Parts For Sale
2
March 7th, 2014 06:09 PM
atkinsom
General Discussion
7
May 29th, 2013 06:39 PM
65OldsDelta88SuperRocket
Big Blocks
2
October 27th, 2011 09:16 PM