Parting out pea soup green 1975 Delta 88 2dr.
#3
why part it?
hello. the car has a blown tranny, a rap in the engine, fenders no good, I bought it cause I knew I could flip the header panel ,[ it's gone] I will cut the trunk floor for a 74' 455 conv I dragged home from Canada, I will keep a few items for my 75 conv., and sell what I don't need. it is in decent shape, I've seen much worse.
left Quarter panel is real good., have a great holiday weekend, Jim
left Quarter panel is real good., have a great holiday weekend, Jim
#4
Hello seller, I would like to know if you have both left and right interior door panel corner light covers? They look rectangular and are half red and half white. If you still have, how much for the pair? Also how much would you like for the rear gasoline plastic door assembly located under the trunk key? Thanks in advance for your reply.
Last edited by Mtaman; May 31st, 2016 at 01:02 AM. Reason: Forgot one part that I needed
#5
Hello seller, I would like to know if you have both left and right interior door panel corner light covers? They look rectangular and are half red and half white. If you still have, how much for the pair? Also how much would you like for the rear gasoline plastic door assembly located under the trunk key? Thanks in advance for your reply.
#7
Hello 76 Regency. I am sorry for the delay In responding, I did not recieve email notification. Pictures will be posted, hopefully tomorrow (tues.) 14,000+ on odometer, I assume 114,000 & change. Trans is shot. Motor ran great, but when I got her home , I reved motor, & it started to knock. The dash would have been nice, but owner decided to stick extra screws in it for some unknown reason. Guy was screw happy. I wish with all my heart the steering wheel where black, it is near perfect. The valve covers look to have most of the original paint on them, and they look real nice, that struck me as odd. The seats are in very , very nice shape, velour. Rear bumper & impact absorbers I am keeping, & the floors & trunk pan are coming out, for a 74 455 conv I dragged home from Canada.
#8
#10
#11
#12
#13
Hi John, Thanks for posting the pics. I see a handful of things of interest but I'll look over the pics some more tomorrow and send you a list.
I have to ask, did somebody actually cut out the dash plate to change the headlight switch??? What a horrible technique when that plate comes off SO easily!
I have to ask, did somebody actually cut out the dash plate to change the headlight switch??? What a horrible technique when that plate comes off SO easily!
#14
Hi John, Thanks for posting the pics. I see a handful of things of interest but I'll look over the pics some more tomorrow and send you a list.
I have to ask, did somebody actually cut out the dash plate to change the headlight switch??? What a horrible technique when that plate comes off SO easily!
I have to ask, did somebody actually cut out the dash plate to change the headlight switch??? What a horrible technique when that plate comes off SO easily!
#15
Oh man. It always amazes me to see just how horribly creative some people get when it comes to their idea of a repair. I just picked apart a '76 98 that had the rearview mirror held in place with a piece of metal that hung down from the upper windshield trim mounting screw. It just needed to be glued back in place for crying out loud!!
Anyway, I'll PM you with the few things I'm considering from the green machine.
Anyway, I'll PM you with the few things I'm considering from the green machine.
#16
Abortionist ll
Oh man. It always amazes me to see just how horribly creative some people get when it comes to their idea of a repair. I just picked apart a '76 98 that had the rearview mirror held in place with a piece of metal that hung down from the upper windshield trim mounting screw. It just needed to be glued back in place for crying out loud!!
Anyway, I'll PM you with the few things I'm considering from the green machine.
Anyway, I'll PM you with the few things I'm considering from the green machine.
Inventive.
#22
#24
Hello, I am sorry, I can't seem to delete photos, the header panel & grilles are gone, right fender available, however, it is rusted at lower rear section. If still intersted , I can send photos tomorrow. Thanks, good luck, Jim.
#26
#29
Fender
Bump
Last edited by bigdooly; September 3rd, 2016 at 08:07 AM.
Thread
Thread Starter
Forum
Replies
Last Post
dedsleds
Parts For Sale
115
June 20th, 2014 12:24 PM