]bump bump

 

Looks like it would be a nice project to save... What's prompting you to part it out? That interior appears to be in great condition...

 

hello. the car has a blown tranny, a rap in the engine, fenders no good, I bought it cause I knew I could flip the header panel ,[ it's gone] I will cut the trunk floor for a 74' 455 conv I dragged home from Canada, I will keep a few items for my 75 conv., and sell what I don't need. it is in decent shape, I've seen much worse.
left Quarter panel is real good., have a great holiday weekend, Jim

 

Hello seller, I would like to know if you have both left and right interior door panel corner light covers? They look rectangular and are half red and half white. If you still have, how much for the pair? Also how much would you like for the rear gasoline plastic door assembly located under the trunk key? Thanks in advance for your reply.

 

dear Mtaman, sorry to dissapoint you, but I've pilfered those items for my own car.

 

Hi Dooly,


Aside from the color, it looks like it has a lot to offer. Can you post some more pics showing the dash, steering wheel, motor, etc. How many miles on her?

 

Hello 76 Regency. I am sorry for the delay In responding, I did not recieve email notification. Pictures will be posted, hopefully tomorrow (tues.) 14,000+ on odometer, I assume 114,000 & change. Trans is shot. Motor ran great, but when I got her home , I reved motor, & it started to knock. The dash would have been nice, but owner decided to stick extra screws in it for some unknown reason. Guy was screw happy. I wish with all my heart the steering wheel where black, it is near perfect. The valve covers look to have most of the original paint on them, and they look real nice, that struck me as odd. The seats are in very , very nice shape, velour. Rear bumper & impact absorbers I am keeping, & the floors & trunk pan are coming out, for a 74 455 conv I dragged home from Canada.

 

 

Hi Dooly,


No problem at all on the timing. I'll keep an eye out for the pics and see if there's anything I can use for my cars or anybody else that I know.


Thanks,
John

 

 

 

Thank you, John.

 

Hi John, Thanks for posting the pics. I see a handful of things of interest but I'll look over the pics some more tomorrow and send you a list.


I have to ask, did somebody actually cut out the dash plate to change the headlight switch??? What a horrible technique when that plate comes off SO easily!

 

Yes, this guy was an abortionist. If I remember, I will post picture of repair job on drivers side view mirror, you'll get a kick out it. If you need that plate that is cut, I have a few of them. I have a lot of instrument clusters, glove boxes heater/ ac controls etc.

 

Oh man. It always amazes me to see just how horribly creative some people get when it comes to their idea of a repair. I just picked apart a '76 98 that had the rearview mirror held in place with a piece of metal that hung down from the upper windshield trim mounting screw. It just needed to be glued back in place for crying out loud!!


Anyway, I'll PM you with the few things I'm considering from the green machine.

 

Check this repair out


Inventive.

 

Well that's one way to stabilize a vibrating mirror.

 

 

 

Bump

 

Hi
I had spoken with u a month or 2 ago about the motor. I had your#
But lost it give me a call
Thanks
Charlie 516-510-5046

 

Sorry, motor in this car has a knock, the motor we discussed from the 75' conv. Has been sold.

 

Hello. If you still have these parts, I am interested in buying the right fender the header panel and the right Grille.

 

Hello, I am sorry, I can't seem to delete photos, the header panel & grilles are gone, right fender available, however, it is rusted at lower rear section. If still intersted , I can send photos tomorrow. Thanks, good luck, Jim.

 

Thanks Jim.

Yes I'm still interested in the fender. Photos would be nice. How much are you asking?

 

How's $75 sound? I am in n.e. pa, (Poconos )

 

 

 

Good morning, there isapproximately 3"× 1 1/2" hole on lower left portion of fender, near door, I probed it with a scewdriver to assess damage. Rest looks ugly, but still solid. It is better than the 3 I scrapped recently. I don't know your location, if you are still interested you can have it for $50. I won't ship it, you'd have to pick it up. It's to much trouble & work . Have a great day. Jim
Bump

 

bump