Hood raised drivers side
#2
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
It's a procedure. Get a helper.
Open the hood, and loosen the 3 bolts that hold the side of the hood spring assembly.
Have your helper push the hood UP firmly from the front.
While he's pushing up, tighten down the 3 bolts.
Hood should lower now with close to level. If necessary, repeat with more upward pressure.
If you only have 2 side hood spring bolts, use those 2. Same procedure.
Open the hood, and loosen the 3 bolts that hold the side of the hood spring assembly.
Have your helper push the hood UP firmly from the front.
While he's pushing up, tighten down the 3 bolts.
Hood should lower now with close to level. If necessary, repeat with more upward pressure.
If you only have 2 side hood spring bolts, use those 2. Same procedure.
Thread
Thread Starter
Forum
Replies
Last Post