Removing lower radiator brackets 72 Cutlass
#1
Removing lower radiator brackets 72 Cutlass
I need to remove my lower radiator support brackets from my core support as my aftermarket radiator is too wide. Before I go crawling under the car, are these spot welded to the core support?
Thanks
Thanks
#4
Chris:
Use a spot weld cutter bit (see pic below) to remove the old radiator saddles, then buy the larger replacements from Fusick or another Olds vendor. You can plug weld the new ones in with a MIG welder.
Rodney
Use a spot weld cutter bit (see pic below) to remove the old radiator saddles, then buy the larger replacements from Fusick or another Olds vendor. You can plug weld the new ones in with a MIG welder.
Rodney
#6
#7
Yep, I did that back in the 80s when I put a 4 core radiator from my brother-in-law's '68 GTO into the Cutlass. I was able to bend them back out when I had the original 3 row radiator recored.
#8
Thread
Thread Starter
Forum
Replies
Last Post
gtuturbo
Parts Wanted
7
March 31st, 2017 04:13 AM
olddaz
General Questions
0
August 27th, 2014 06:39 PM
w-30dreamin
General Discussion
3
November 24th, 2011 09:11 AM
RATCHETMASTER
Brakes/Hydraulic Systems
0
January 29th, 2009 07:45 AM