General Discussion Discuss your Oldsmobile or other car-related topics.

Lower ball joint

Thread Tools
 
Search this Thread
 
Old March 5th, 2018, 04:00 PM
  #1  
Registered User
Thread Starter
 
dennis_30281's Avatar
 
Join Date: Jun 2016
Location: Stockbridge, Georgia
Posts: 409
Lower ball joint

Maybe you guys remember a few weeks ago I had a dilemma with the rt lower ball joint not fitting into the spindle all the way. Well, the remedy was a new ball joint and all is well now.
I'm including a few pics of the non-conforming ball joint to see if anyone might be able to identify it.
Dennis


dennis_30281 is offline  
Old March 7th, 2018, 07:22 PM
  #2  
Registered User
Thread Starter
 
dennis_30281's Avatar
 
Join Date: Jun 2016
Location: Stockbridge, Georgia
Posts: 409
Anybody got any ideas?
dennis_30281 is offline  
Old March 8th, 2018, 01:45 PM
  #3  
Registered User
 
Fun71's Avatar
 
Join Date: Feb 2013
Location: Phoenix, AZ
Posts: 14,150
I don't even have an idea what vehicle that's supposed to fit.
Fun71 is offline  
Old March 8th, 2018, 02:11 PM
  #4  
Registered User
Thread Starter
 
dennis_30281's Avatar
 
Join Date: Jun 2016
Location: Stockbridge, Georgia
Posts: 409
This was supposed to fit a 1962 Starfire, but the ball stud didn't go all the way into the spindle hole.
Dennis
dennis_30281 is offline  
Old March 8th, 2018, 06:44 PM
  #5  
Phantom Phixer
 
Charlie Jones's Avatar
 
Join Date: Dec 2011
Location: Apopka, FL
Posts: 4,761
I can't find that number in any of my Olds parts books .Maybe a Buick or Pontiac part ?
Charlie Jones is offline  
Old March 8th, 2018, 07:31 PM
  #6  
Registered User
 
SWinner's Avatar
 
Join Date: Dec 2010
Location: Cypress, TX (Houston)
Posts: 56
My 56 T-Bird has ball joints like the one you are showing.

What car are you wanting ball joints for?

Last edited by SWinner; March 8th, 2018 at 07:35 PM.
SWinner is offline  
Old March 9th, 2018, 06:31 AM
  #7  
Registered User
Thread Starter
 
dennis_30281's Avatar
 
Join Date: Jun 2016
Location: Stockbridge, Georgia
Posts: 409
Originally Posted by SWinner
My 56 T-Bird has ball joints like the one you are showing.

What car are you wanting ball joints for?
I've got all my ball joints,but I bought this one and it was supposed to be for my 62' Starfire ,and it didn't fit the spindle hole.
Dennis
dennis_30281 is offline  
Old March 9th, 2018, 08:42 AM
  #8  
Registered User
 
friskyjake67's Avatar
 
Join Date: Mar 2014
Posts: 14
ball joint

I,ve been reading about your request since you started your request. I ,m trying to remember, I think it is a ford lower ball joint. I was a alignment man for many years. [1967 to 1978]. So it,s hard to put a year into your request but I think a 1961 to 1963 [maybe later] Thunderbird. Good luck Friskyjake
friskyjake67 is offline  
Old March 10th, 2018, 05:29 AM
  #9  
Registered User
Thread Starter
 
dennis_30281's Avatar
 
Join Date: Jun 2016
Location: Stockbridge, Georgia
Posts: 409
Thanks everyone who responded. Looks like I have an expensive door stop to kick around.
Dennis
dennis_30281 is offline  
Old March 10th, 2018, 03:22 PM
  #10  
Registered User
 
SWinner's Avatar
 
Join Date: Dec 2010
Location: Cypress, TX (Houston)
Posts: 56
Originally Posted by dennis_30281
Thanks everyone who responded. Looks like I have an expensive door stop to kick around.
Dennis
I found this link:

http://fcrcmachine.com/rare-parts-lo...uper-88-10127/

It appears that it fits full size Olds from 59-62 including your Starfire. You should return it to the seller if it does not fit. Those things are expensive.

Good luck.
SWinner is offline  
Old March 11th, 2018, 06:13 AM
  #11  
Registered User
Thread Starter
 
dennis_30281's Avatar
 
Join Date: Jun 2016
Location: Stockbridge, Georgia
Posts: 409
I've had the bj for years and don't recall where it came from.
Dennis
dennis_30281 is offline  
Old March 11th, 2018, 06:35 AM
  #12  
Registered User
Thread Starter
 
dennis_30281's Avatar
 
Join Date: Jun 2016
Location: Stockbridge, Georgia
Posts: 409
I hate to see a perfectly good bj sit around and eventually get tossed.
I will send the bj to someone who needs a late fifties, early sixties bj for any car if you think it fits your car. If it fits in your spindle then you send me a check for $70 + the shipping l spent.
If it doesn't fit then you send it back to me and you pay shipping.
Dennis
dennis_30281 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
defiant1
General Questions
5
March 16th, 2015 09:44 AM
805cut
Chassis/Body/Frame
3
July 22nd, 2012 05:53 PM
defiant1
General Questions
26
October 29th, 2010 12:41 PM
73toro
Toronado
6
June 12th, 2010 09:09 PM
70vista
Chassis/Body/Frame
4
November 19th, 2009 05:54 PM



Quick Reply: Lower ball joint



All times are GMT -7. The time now is 01:18 AM.