Question on 1972 Oldsmobile Cutlass supreme suspension rebuild kit
#1
Question on 1972 Oldsmobile Cutlass supreme suspension rebuild kit
Hello everyone, recently decided to think of rebuilding my front end on my 1972 Oldsmobile Cutlass Supreme's suspension. Found a master rebuild kit online but I am lost on which kit to order due to not knowing if the bushings are oval or round. I will reference a screenshot of the kit with oval bushings. Any ideas if they are round or oval on my year and model? Any help appreciated! Thanks
-Rick
-Rick
#3
Thanks for your input nonetheless sir!
-Rick
#5
A few tips: You'll need a hammer and chisel to remove these if they were never done before. Also Autozone/AdvanceAuto are great for getting the tools you'll need for free of you don't have them. Good luck!
Last edited by dalilama; January 15th, 2018 at 11:14 AM. Reason: Clarity
#6
Using urethane bushings, your car will ride very hard. It feels like your car has stone tires. If your town has pot holes, you're going to feel it. I live in NYC and there's a lot of pot holes and I feel like changing it back to rubber.
Thread
Thread Starter
Forum
Replies
Last Post
TwinTurbo455
Parts For Sale
2
January 19th, 2015 07:13 PM
Eddie Hansen
Drivetrain/Differentials
3
March 31st, 2010 09:54 AM