Can you tell what brand these are

Old February 5th, 2019, 07:36 AM
  #1  
Registered User
Thread Starter
 
young olds's Avatar
 
Join Date: Mar 2010
Location: Mt Vernon,WA
Posts: 1,946
Can you tell what brand these are



These popped up on my local Craigslist, guy selling them does not know much about them. Look like knock offs of the nice Harland sharp with the common shaft. They are cheap enough, if they are a known good rocker to use i will pick them up. He said he had guide plates as well but I was under the impression you did not need them with shaft mounts.

Last edited by young olds; February 5th, 2019 at 08:14 AM.
young olds is online now  
Old February 5th, 2019, 07:53 AM
  #2  
Administrator
 
oldcutlass's Avatar
 
Join Date: Oct 2009
Location: Poteau, Ok
Posts: 40,519
They look like Harland Sharp.
oldcutlass is offline  
Old February 5th, 2019, 08:02 AM
  #3  
Registered User
Thread Starter
 
young olds's Avatar
 
Join Date: Mar 2010
Location: Mt Vernon,WA
Posts: 1,946
The Harland’s I have seen had a smaller common shaft and nicer looking adjustment screws for valve lash.
young olds is online now  
Old February 5th, 2019, 08:08 AM
  #4  
Registered User
Thread Starter
 
young olds's Avatar
 
Join Date: Mar 2010
Location: Mt Vernon,WA
Posts: 1,946
These (not these exact ones but the smaller shaft) are the ones I am use to seeing but while looking for this picture I found a picture of a set that looked exactly as above and said they were Harland’s.
young olds is online now  
Old February 5th, 2019, 09:30 AM
  #5  
Registered User
 
Inline's Avatar
 
Join Date: Sep 2015
Location: Chicago suburbs, Finland
Posts: 1,882
That set you last posted a picture of, is in sale on oldsrocketparts, without zero mentions about them being HS ( and i bet they would mention they are HS rockers if they really would be), and the price they are listing for those, is 224$, which also suggests they are not genuine HS's.
Inline is offline  
Old February 5th, 2019, 11:53 AM
  #6  
Registered User
Thread Starter
 
young olds's Avatar
 
Join Date: Mar 2010
Location: Mt Vernon,WA
Posts: 1,946
Originally Posted by Inline
That set you last posted a picture of, is in sale on oldsrocketparts, without zero mentions about them being HS ( and i bet they would mention they are HS rockers if they really would be), and the price they are listing for those, is 224$, which also suggests they are not genuine HS's.
so you think the original post are Harland’s and second picture are the knock offs? If so I am definitely picking them up.
young olds is online now  
Old February 5th, 2019, 12:22 PM
  #7  
Registered User
 
Inline's Avatar
 
Join Date: Sep 2015
Location: Chicago suburbs, Finland
Posts: 1,882
Honestly no idea. I just knew ive seen something similiar than the pic i referenced, and searched it up to point it for you/ someone else for reference purposes.
Inline is offline  
Old February 5th, 2019, 01:15 PM
  #8  
Registered User
 
Bernard Mondello's Avatar
 
Join Date: Jul 2012
Location: Corona, California
Posts: 40
The very top picture are second generation Mondello shaft bolt on roller rocker arms.

the original design was different in design and purple in color...

Bernard Mondello
Bernard Mondello is offline  
Old February 5th, 2019, 03:30 PM
  #9  
Registered User
Thread Starter
 
young olds's Avatar
 
Join Date: Mar 2010
Location: Mt Vernon,WA
Posts: 1,946
Originally Posted by Bernard Mondello
The very top picture are second generation Mondello shaft bolt on roller rocker arms.

the original design was different in design and purple in color...

Bernard Mondello
Are they a good rocker arm? Geometry, strength, stability, etc?
young olds is online now  
Old February 5th, 2019, 04:20 PM
  #10  
Registered User
 
Bernard Mondello's Avatar
 
Join Date: Jul 2012
Location: Corona, California
Posts: 40
Those rockers were made by Harland sharp and are for stock cast iron cylinder heads with stock length valves...

These were made about 30+ years ago, but if in good shape will last a lifetime.

If you have longer valves you must shim the pedestal accordingly!

Bernard Mondello
Bernard Mondello is offline  
Old February 5th, 2019, 07:18 PM
  #11  
Registered User
Thread Starter
 
young olds's Avatar
 
Join Date: Mar 2010
Location: Mt Vernon,WA
Posts: 1,946
I am running iron heads with stock valves. Guy is asking $200, good buy for these old rockers?
young olds is online now  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2blu442
General Discussion
8
March 20th, 2019 01:34 PM
deaddds
General Discussion
2
February 18th, 2019 07:42 AM
72455
General Discussion
3
December 25th, 2018 01:22 PM
meoff
General Discussion
13
August 12th, 2018 11:00 AM
dele
The Newbie Forum
28
January 19th, 2017 01:14 AM


Thread Tools
Search this Thread
Quick Reply: Can you tell what brand these are



All times are GMT -7. The time now is 12:20 PM.